Abstract:The method established previously for studying the etching rates of micro-scale silicon and silica was used to study the etching process of silicon and silica on the Si(100) surface. Photolithography was used to pattern a positive photoresist mask to confine the etching area, and the atomic force microscopy was used to probe the etched surface. The lateral etching rate of silicon or silica on the silicon surface was defined, and the lateral and longitudinal etching rates of silicon and silica on the Si(100) surface in 40% ammonium fluoride aqueous solution were measured. The effect of the dissolved oxygen on the etching rates was studied by bubbling the solution with high purity nitrogen. The lateral and longitudinal etching rates of silicon and silica on the (100) surface increase with temperatures except for the lateral etching rate of silica in a N-2-bubbled solution which probably reaches the limit of diffusion controlled reaction. The etching rates of silicon and thermal silica on the Si(100) surface show remarkable difference with that on the Si (111) surface in both air-saturated and N-2-bubbled solutions. The apparent activation energies for the silicon and silica etching processing in ammonium fluoride solution were obtained from the etching rates at different temperatures in the range 20.6 similar to 34.1degreesC. The similarity of the apparent activation energies for the etching processing of silicon and silica on the (100) surface to that on the (111) surface probably suggests that the rate-determined-step is the same in both cases. A lot of gas bubbles are seen to aggregate on the surface in silicon dissolution process at 38.2degreesC, and it is found that the gas bubbles have great influence on the silicon etching rate. The formation of bubbles accelerates the silicon dissolution at the beginning but blocks the etching as the bubbles gradually aggregate on the surface.

Study of etched ion track profiles in silicon dioxide membrane

Study on Nano-meter Scale Observation of Latent Tracks Induced by Ions

Etching Characteristic for Tracks of Multicharged Ions in Polymer

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Fabrication of Nanoporous Silicon Dioxide/silicon Nitride Membranes Using Etched Ion Track Technique

An Etchant for Delineation of Flow Pattern Defects in Heavily Doped N-Type Silicon Wafers

A Systematic Study on Dry Etching Process of Germanium for Ge 3D-Fets Applications

A Novel Technique for Measuring Etch Rate Distribution of Si

Novel method for determining the etch rate distributions of Si

The Lateral and Longitudinal Etching Rates of Silicon and Silica on Si(100) Surface

Characterization of the Surface Charge Property and Porosity of Track-etched Polymer Membranes

Monte Carlo simulation and measurement of silicon reactive ion etching profiles

Quantitative Assessment of Molecular Transport Through Sub-3 Nm Silica Nanochannels by Scanning Electrochemical Microscopy.

Study of the Nanometer Scale Polysilicon Micro Structure Etching

A Two-Step Etching Method to Fabricate Nanopores in Silicon

Direct and indirect determination of track etch parameters after sequential UV-C exposure and etching for two swift heavy ions in PADC: Production of rocket-shaped tracks

Direct Measurement of the Etching Rates on Si(111) and Silicon Dioxide Surfaces in 40% Ammonium Fluoride Aqueous Solution Via Atomic Force Microscopy

Etching Mechanisms of CF3Etching Fluorinated Si: Molecular Dynamics Simulation

Controllable Etching of Heavy Ion Tracks with Organic Solvent Addition in Etchant

Simulation of profile evolution in etching-polymerization alternation in drie of silicon with SF6/C4F8

Simulation of profile evolution in etching-polymerization alternation in DRIE of silicon with SF/sub 6//C/sub 4/F/sub 8/