Abstract:This paper reports an advanced deep reactive ion etching (DRIE) process for realizing ultra-deep (>500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula>) and ultra-high aspect-ratio (UHAR) silicon structures (AR > 40 for 1-mm through-trench etch, <inline-formula> <tex-math notation="LaTeX">$\text {AR}\approx 80$ </tex-math></inline-formula> for 500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> through-trench etch, and AR > 20 for 500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> through-hole etch), with straight sidewalls across a wide range of feature sizes. The challenges of making such structures are overcome by continuously ramping critical parameters of the Bosch DRIE process throughout the process, including the 380-kHz bias power during etch step, the etch/passivation step duration, and the chamber pressure. The masking material capable of enduring the long DRIE process is also discussed; 10-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> and 25-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> wide trenches are etched to a depth of >750-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> and >1000-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula>, respectively, in 1-mm-thick silicon wafers with straight sidewall profiles and flat trench bottoms. Deeper trenches are expected to be etched beyond a 1-mm thick wafer with thicker and/or higher selectivity masking materials. We have also demonstrated etching of circular holes of diameters as small as 25-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> to a depth of >500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula>, and potentially with 10–15 <inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> diameter holes. This advanced DRIE process offers opportunities for applications ranging from through-silicon via in 3-D CMOS integration to emerging micro- and meso-scale microelectromechanical system applications that demand ultra-deep and UHAR DRIE. [2017–0298]

Novel method for determining the etch rate distributions of Si

A Novel Technique for Measuring Etch Rate Distribution of Si

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Reliability assessment of the complete 3D etch rate distribution of Si in anisotropic etchants based on vertically micromachined wagon wheel samples

3D Simulation of Profile Evolution in Silicon DRIE

Three-Dimensional Simulation of DRIE Process Based on the Narrow Band Level Set and Monte Carlo Method

Simulation of profile evolution in etching-polymerization alternation in DRIE of silicon with SF/sub 6//C/sub 4/F/sub 8/

Modeling and Simulation of Silicon Dry Etching

An Etchant for Delineation of Flow Pattern Defects in Heavily Doped N-Type Silicon Wafers

Simulation of three-dimensional etch profile of silicon during orientation dependent anisotropic etching

A new theory for the anisotropic etching of silicon and some underdeveloped chemical micromachining concepts

Three step deep reactive ion etch for high density trench etching

Simulation of profile evolution in etching-polymerization alternation in drie of silicon with SF6/C4F8

Flux based modeling and simulation of dry etching for fabrication of silicon deep trench structures

Investigation of Etch Rate Distribution by Micro-hemisphere for the Anisotropic Wet Etching of Ga-Face Gallium Nitride Crystal

Simulation of two-dimensional etch profile of silicon during orientation-dependent anisotropic etching

Ultra Deep Reactive Ion Etching of High Aspect-Ratio and Thick Silicon Using a Ramped-Parameter Process

In-situ Measurement of Ion Angular Distribution in Bulk Titanium DRIE for Modeling the Etch Profile

A novel convex corner compensation for wet anisotropic etching on (100) silicon wafer

Improvement on the Uniformity of Deep Reactive Ion Etch for Electrically Isolated Silicon-Based Substrates

Orientation dependent etching of silicon by fluorine molecules: a quantum chemistry computational study