Abstract:This paper reports an advanced deep reactive ion etching (DRIE) process for realizing ultra-deep (>500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula>) and ultra-high aspect-ratio (UHAR) silicon structures (AR > 40 for 1-mm through-trench etch, <inline-formula> <tex-math notation="LaTeX">$\text {AR}\approx 80$ </tex-math></inline-formula> for 500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> through-trench etch, and AR > 20 for 500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> through-hole etch), with straight sidewalls across a wide range of feature sizes. The challenges of making such structures are overcome by continuously ramping critical parameters of the Bosch DRIE process throughout the process, including the 380-kHz bias power during etch step, the etch/passivation step duration, and the chamber pressure. The masking material capable of enduring the long DRIE process is also discussed; 10-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> and 25-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> wide trenches are etched to a depth of >750-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> and >1000-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula>, respectively, in 1-mm-thick silicon wafers with straight sidewall profiles and flat trench bottoms. Deeper trenches are expected to be etched beyond a 1-mm thick wafer with thicker and/or higher selectivity masking materials. We have also demonstrated etching of circular holes of diameters as small as 25-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> to a depth of >500-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula>, and potentially with 10–15 <inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> diameter holes. This advanced DRIE process offers opportunities for applications ranging from through-silicon via in 3-D CMOS integration to emerging micro- and meso-scale microelectromechanical system applications that demand ultra-deep and UHAR DRIE. [2017–0298]

3D Simulation of Profile Evolution in Silicon DRIE

Simulation of profile evolution in etching-polymerization alternation in DRIE of silicon with SF/sub 6//C/sub 4/F/sub 8/

Simulation of profile evolution in etching-polymerization alternation in drie of silicon with SF6/C4F8

Three-Dimensional Simulation of DRIE Process Based on the Narrow Band Level Set and Monte Carlo Method

Modeling and Simulation of Silicon Dry Etching

Improvement of Drie Simulation Method for Process Development Application

Simulation of three-dimensional etch profile of silicon during orientation dependent anisotropic etching

A Three-Step Model of Black Silicon Formation in Deep Reactive Ion Etching Process

Flux based modeling and simulation of dry etching for fabrication of silicon deep trench structures

A cellular automaton-based simulator for silicon anisotropic etching processes considering high index planes

Modeling and simulation of the lag effect in a deep reactive ion etching process

A Three-Dimensional Surface Evolution Algorithm Based on Cellular Model for Etching Process

Ultra Deep Reactive Ion Etching of High Aspect-Ratio and Thick Silicon Using a Ramped-Parameter Process

The Simulation Research of DRIE Process

Ultra high aspect-ratio and thick deep silicon etching (UDRIE)

Three step deep reactive ion etch for high density trench etching

A 3-D Simulator for Silicon Anisotropic Wet Chemical Etching Process Based on Cellular Automata

Three-dimensional cellular model for profile simulation of ion etching process

Methods to Protect Silicon Microstructures from the Damages in Deep Reactive Ion Etching

Level Set Approach to Anisotropic Wet Etching of Silicon

Novel method for determining the etch rate distributions of Si