Abstract:NiPtAl coatings are widely used as overlaying coatings besides bondcoats for thermal barrier coating (TBC) systems within high temperature environment. Oxidaiton behavior of NiPtAl coatings is mainly contribution for the failure of TBC systems or overlaying coatings. An initial oxide layer growth characteristics play a key role in extending lifetime of TBC system or overlaying coatings. In this work, the oxidation experiments of the Pt modified aluminide coating on CMSX-4 Ni-based alloy were carried out at 1150 degrees C for 1 h in 80% Ar+20%O-2. The microstructures of oxide on the NiPtAl coatings are studied by OM, SEM, TEM and Raman spectroscopy. The results indicated that the oxide layer on the NiPtAl coatings included stable and met-stable Al2O3 after 1 h oxidation, and part of spalled oxide layer as well as pores within the oxide layer. The 0.5 mu m thickness whisker-like theta-Al2O3 could form on NiPtAl coating during the initially oxidation stage. At the initial oxidation stage theta-Al2O3 fastly grew which resulted beta-NiAl to gamma'-Ni3Al transformation. The Pt particles formed on the inter-surface between alpha-Al2O3 and theta-Al2O3 layer due to a less Pt solid solubility in gamma'-Ni3Al compared to beta-NiAl in the coating. Fast growth of initial Al2O3 could induce pores formation within the alumina layer. The pores and stress due to oxidation and phase transformation could decrease the alumina adherence, and at last result in the oxide spallation.

Effects of thermal exposure on Ir-based alloys with and without Pt coating

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Influence factors of high temperature oxidation for Pt-modified-aluminide bond coatings

Influences of Iridium and Palladium on Oxidation Resistance of PtAl Coating

Effect of Pt on Stress Rupture Properties of Pt-Modified Nickel Aluminide Coatings at 1100 °C

High-Temperature Oxidation Behavior of a Single-Layer IrAl Intermetallic Coating

High-temperature performance of Pt-modified Ni-20Co-28Cr-10Al-0.5Y coating: Formation mechanism of Pt-rich overlayer and its effect on thermally grown oxide failure

Oxidation Behavior and Oxide Transformation of a Pt-Modified Aluminide Coating at Moderate High Temperature

Influence of Pt on oxidation behavior of CoNiCrAlY alloy

Microstructure and Oxidation Behaviour of Ir-rich Ir–Al Binary Alloys

Effect of Pt Addition on the Oxidation and Corrosion Resistance of Al0.25CoCrFeNi High-Entropy Alloy

Microstructure Analysis of Initial Alumina of Pt-Modified Aluminide Coatings on Ni-Based Alloy

Oxidation Behaviours of Ir-Hf and Ir-Zr Coatings under Different Air Pressures at 1800℃

Investigation of Pt-Dy Co-Doping Effects on Isothermal Oxidation Behavior of (Co,ni)-Based Alloy

Influences of Calcination Ambiences on Phase Composition and High Temperature Oxidation Resistance Property of Ceramic Coatings on Ti–6Al–4V Alloy by Micro-Plasma Oxidation

Influences of Argon Ambience on Phase Composition and High Temperature Oxidation Resistance Property of Ceramic Coatings on Ti Alloy by Micro-Arc Oxidation

On the Thermal Shock Resistance and Failure Mechanism of the Pt-Modified Aluminide Bond Coating

Effect of Hf Addition on Initial Microstructure of (ni, Pt)Al Coating and Inhibiting the Detrimental Sulfur During High Temperature Exposure at 1150 °C

Effects of Reactive Element Oxides on the Isothermal Oxidation of Β-Nial Coatings Fabricated by Spark Plasma Sintering

Surface characteristics and electrochemical corrosion behavior of NiTi alloy coated with IrO2

Synergistic Effect of Pt and Hf on the Early-Stage Oxidation Behaviour of NiAl Coating at 1000°C