Abstract:Surface coatings are the best ways to protect materials from deterioration due to various aspects including corrosion and wear. However, after long-term oxidation, the high temperature oxidation resistance of TiAl-4Nb-1.5Mo (B, Y) alloy coated with NiCoCrAlY bond coating is weakened by the interfacial interdiffusion. Herein, the microstructure evolution, elements interdiffusion, and mechanical properties at the interface between TiAl alloy and NiCoCrAlY bond coating are analyzed through an isothermal oxidation experiment at 950 °C. Results show that the coarsening and coalescence of the β phase occur in the bond coating during high temperature oxidation. Meanwhile, the thickness of the bond coating decreases linearly before oxidation for 100 h. As the oxidation time increases, the consumption rate of the bond coating slows down. Based on the Layer-by-layer phase composition analysis, it is found that the interdiffusion zone forms three layers in sequence: NiAl and Al (Ni, Co)2Ti, AlNi2Ti(Nb, Mo) and Ti3Al, and Al3NiTi2 and TiAl. The TiN phase segregated around the α-Cr as well as the enriched Y element led to generation of microcracks. The TiN phase forms at the phase boundary between the β and γ phases after 250 h of oxidation. The layer composed of AlNi2Ti(Nb, Mo) and Ti3Al phase exhibits a severe hardening phenomenon, which may reduce the long-term service life of the TiAl alloy coated with NiCoCrAlY bond coating.

High-Temperature Oxidation Behavior of a Single-Layer IrAl Intermetallic Coating

Ablation Behaviors of IrAl Intermetallic Coatings in a Plasma Wind Tunnel

EFFECT OF MCrAlY COATINGS ON OXIDATION RESISTANCE OF TiAl INTERMETALLICS

Microstructure and Oxidation Behaviour of Ir-rich Ir–Al Binary Alloys

Oxidation Behavior of Cr1-xAlx Coated Zr-4 Alloy under 1200 °C High Temperature Steam Environment

Oxidation Behaviours of Ir-Hf and Ir-Zr Coatings under Different Air Pressures at 1800℃

High-temperature performance of Pt-modified Ni-20Co-28Cr-10Al-0.5Y coating: Formation mechanism of Pt-rich overlayer and its effect on thermally grown oxide failure

Structural and High-Temperature Oxidation Performance of Al-Co-Y Co-deposited Coatings on a TiAl-Nb Alloy at Low Temperatures

Improving the high temperature oxidation resistance of TiAl alloy by SiOC coating

Enhancing High-Temperature Oxidation Resistance of Ti6Al4V Alloy by Simple Surface Aluminization

High-Temperature Oxidation And Tensile Behaviors Of Cral Coating On Zirconium Alloy

Interdiffusion mechanism at the interface between TiAl alloy and NiCoCrAlY bond coating

High Temperature Oxidation Behaviors of Al/Cr Composite Coating on Ti2AlNb Alloy

Oxidation Behavior of a Ti–Al–C + Y–Al–O Two-Layer Coating

Effect of Nickel Aluminide Microcrystalline Coating on High-Temperature Oxidation Behavior of NiAl-33.5%Cr-0.5%Zr Alloy

High-temperature steam oxidation behavior and failure mechanisms of Al alloyed Cr coatings on Zr-4 alloy

Oxidation Behavior and Oxide Transformation of a Pt-Modified Aluminide Coating at Moderate High Temperature

Effect of Al content on high-temperature oxidation behavior and failure mechanism of CrAl-coated Zircaloy

Preparation, Mechanical Properties and Cyclic Oxidation Behavior of the Nanostructured NiCrCoAlY-TiB2 Coating

Influences of Iridium and Palladium on Oxidation Resistance of PtAl Coating

Isothermal oxidation resistance and microstructure evolution of VPS-TiAlCrY coating on TiAl single crystals at 1100-1200 o C