Abstract:NiPtAl coatings are widely used as overlaying coatings besides bondcoats for thermal barrier coating (TBC) systems within high temperature environment. Oxidaiton behavior of NiPtAl coatings is mainly contribution for the failure of TBC systems or overlaying coatings. An initial oxide layer growth characteristics play a key role in extending lifetime of TBC system or overlaying coatings. In this work, the oxidation experiments of the Pt modified aluminide coating on CMSX-4 Ni-based alloy were carried out at 1150 degrees C for 1 h in 80% Ar+20%O-2. The microstructures of oxide on the NiPtAl coatings are studied by OM, SEM, TEM and Raman spectroscopy. The results indicated that the oxide layer on the NiPtAl coatings included stable and met-stable Al2O3 after 1 h oxidation, and part of spalled oxide layer as well as pores within the oxide layer. The 0.5 mu m thickness whisker-like theta-Al2O3 could form on NiPtAl coating during the initially oxidation stage. At the initial oxidation stage theta-Al2O3 fastly grew which resulted beta-NiAl to gamma'-Ni3Al transformation. The Pt particles formed on the inter-surface between alpha-Al2O3 and theta-Al2O3 layer due to a less Pt solid solubility in gamma'-Ni3Al compared to beta-NiAl in the coating. Fast growth of initial Al2O3 could induce pores formation within the alumina layer. The pores and stress due to oxidation and phase transformation could decrease the alumina adherence, and at last result in the oxide spallation.

Influence of Pt on oxidation behavior of CoNiCrAlY alloy

Investigation of Pt-Dy Co-Doping Effects on Isothermal Oxidation Behavior of (Co,ni)-Based Alloy

Cyclic oxidation behavior of Pt modified NiCoCrAlYHfZr + AlNiY coating on a Ni-based single crystal superalloy

High-temperature performance of Pt-modified Ni-20Co-28Cr-10Al-0.5Y coating: Formation mechanism of Pt-rich overlayer and its effect on thermally grown oxide failure

Pt-modification on the thermal cycling behavior of NiCoCrAlYTa coating: a case study

Diffusion Characteristics and Structural Stability of Pt Modified Β-Nial/γ′-ni3al Within NiCoCrAl Alloy at High Temperature

Influence of Aluminum and Rhenium on the Isothermal Oxidation Behavior of CoNiCrAlY Alloys

Effect of Pt modification on hot corrosion resistance of NiCrAlYSi+AlY coating at 900 °C

Influences of Al content on oxidation behavior of CoNiCrAlYRe alloys

Impact of Pt/Al ratios on the cyclic oxidation and TCP precipitation of β-(Ni, Pt)Al coated superalloy at 1150 °C

Effect of Pt Addition on the Oxidation and Corrosion Resistance of Al0.25CoCrFeNi High-Entropy Alloy

Microstructure Analysis of Initial Alumina of Pt-Modified Aluminide Coatings on Ni-Based Alloy

The influence of Cr on the oxidation behavior of a sputtered Pt+γ' phase-equilibrium coating at 1150 °C

Effect of Pt on Stress Rupture Properties of Pt-Modified Nickel Aluminide Coatings at 1100 °C

On the interdiffusion and precipitation of topologically close-packed phases in (Ni,Pt)Al coating/superalloy system: Effects of Pt and Ni contents in coating

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Effect of Co distribution on the oxidation behavior of aluminide coatings in Mo-rich Ni-based single-crystal superalloy

A novel single-phase γ′ nanocrystalline coating with high resistance to oxidation and scale rumpling yet mitigated interdiffusion with the alloy substrate

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys

Interdiffusion mechanism at the interface between TiAl alloy and NiCoCrAlY bond coating

Influence of Ti addition on oxidation behavior of Ni-Cr-W-based superalloys