Abstract:Pt-modified NiAl bond coats are used to extend the lifetime of blades in gas turbine engine applications. However, they suffer from the growth of deleterious precipitates within the interdiffusion zone. Partial substitution of Pt by Pd is advantageous in reducing the interdiffusion zone thickness between the bond coat and the superalloy, providing comparable oxidation properties, and critically reducing the propensity to form brittle (Pt,Ni)Al 2 precipitates. In this study, we utilize the pseudo-binary diffusion couple method to estimate the interdiffusion coefficients of Ni and Al in Pd, Pd-Pt and Pt-modified nickel aluminides. Additionally, the main and cross-interdiffusion coefficients are estimated in the ternary diffusion couples. The estimated diffusion coefficients in the β -NiAl phase reflect on the thickness of the β phase in the superalloy bond coat interdiffusion zone. Pd reduces the pseudo-binary interdiffusion coefficients of Ni-Al and also decreases the main and cross-ternary interdiffusion coefficients. This correlates with the reduction of the interdiffusion zone thickness by Pd. The diffusion process is strongly assisted by point defects in this phase. Ab initio-informed defect calculations are done to explain diffusion retardation in the presence of Pd (compared to Pt) with decreased defect concentrations. Furthermore, through in-depth microstructure characterization performed by electron probe micro analyzer, transmission electron microscopy, and atom probe tomography, the presence of σ , R and μ phases as TCP precipitates in the interdiffusion zone are identified. The results give insights into the coatings' diffusional properties that influence the service life of the product.

Diffusion Characteristics and Structural Stability of Pt Modified Β-Nial/γ′-ni3al Within NiCoCrAl Alloy at High Temperature

Effect of Substrate Characteristics on Interdiffusion Coefficients of Ni and Al Atoms in Β-Nial Phase of Aluminide Coatings

Effect of Pt on Stress Rupture Properties of Pt-Modified Nickel Aluminide Coatings at 1100 °C

High-temperature performance of Pt-modified Ni-20Co-28Cr-10Al-0.5Y coating: Formation mechanism of Pt-rich overlayer and its effect on thermally grown oxide failure

Influence of Pt on oxidation behavior of CoNiCrAlY alloy

Microstructure Analysis of Initial Alumina of Pt-Modified Aluminide Coatings on Ni-Based Alloy

Pt-modification on the thermal cycling behavior of NiCoCrAlYTa coating: a case study

Investigation of Pt-Dy Co-Doping Effects on Isothermal Oxidation Behavior of (Co,ni)-Based Alloy

Cyclic oxidation behavior of Pt modified NiCoCrAlYHfZr + AlNiY coating on a Ni-based single crystal superalloy

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Stability of NiCrAlY coating/titanium alloy system under pure thermal exposure

On the interdiffusion and precipitation of topologically close-packed phases in (Ni,Pt)Al coating/superalloy system: Effects of Pt and Ni contents in coating

Preparation and Enhanced Isothermal Oxidation Resistance of a Low Diffusivity NiRePtAl Single-Phase Coating

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Tensile crack inhibition of a PtReAl coated Ni 3 Al-based single crystal superalloy after long-term oxidation

Effect of Pt modification on hot corrosion resistance of NiCrAlYSi+AlY coating at 900 °C

Interdiffusion mechanism at the interface between TiAl alloy and NiCoCrAlY bond coating

Investigation on the tensile properties of PtAl and PtReAl coated Ni3Al-based single crystal superalloy

Effect of Nickel Aluminide Microcrystalline Coating on High-Temperature Oxidation Behavior of NiAl-33.5%Cr-0.5%Zr Alloy

Formation mechanism of Pt-modified aluminide coating structure by out-of-the-pack aluminizing

Diffusion-controlled growth and microstructural evolution between Pt and Pd containing B2-NiAl bondcoats and Ni-based single crystal superalloy