Effect of Cr Content on the High Temperature Oxidation Behavior of FeCoNiMnCrx Porous High-Entropy Alloys
Ying Wang,Dong Li,Shengding Wang,Mao Zhang,Pan Gong,Zhigang Hu,Bin Li
DOI: https://doi.org/10.1016/j.jmrt.2024.10.025
2024-01-01
Abstract:FeCoNiMnCr porous high-entropy alloys were prepared using the activation reaction sintering method with Fe, Co, Ni, Mn, and Cr as raw materials. The oxidation behaviors of FeCoNiMnCrx x porous high-entropy alloys with different Cr contents, such as pore structure, the surface oxide film phase composition, structure, and morphology, were characterized by X-ray diffraction (XRD), electron probe micro analysis (EPMA), energy dispersive X-ray spectroscopy (EDS), and pore tester after high-temperature oxidation at 800-1000 degrees C. The results indicate that the initial porous high-entropy alloy comprises a single FCC solid solution phase. With the increase in Cr content, the average pore diameter, average porosity, and air permeability of the porous high- entropy alloy also increase. The oxidation kinetics of the porous high-entropy alloy after exposure to temperatures between 800 degrees C and 1000 degrees C follows a single-stage parabolic evolution law. At the same oxidation temperature, With the increase of Cr content, the oxidation gains gradually increased, at the same Cr content at different temperatures, the antioxidant performance of 1000 degrees C was the weakest, followed by 800 degrees C, and 900 degrees C showed excellent antioxidant performance. The oxidation products are mainly Mn2O3, 2 O 3 , Mn3O4, 3 O 4 , (Mn, Cr)3O4, 3 O 4 , Cr2O3and 2 O 3 and Fe2O3. 2 O 3 .