Abstract:One of the most promising applications of FeNiCoCrMoAl-based high-entropy alloy is the fabrication of protective coatings. In this work, gas-atomized powder of FeNiCoCrMo0.5Al1.3 composition was deposited via high-velocity oxygen fuel spraying. It was shown that in-flight oxidation of the powder influences the coating's phase composition and properties. Powder oxidation and phase transformations were studied under HVOF deposition, and during continuous heating and prolonged isothermal annealing at 800 °C. Optical and scanning electron microscopy observation, energy dispersive X-ray analysis, X-ray diffraction analysis, thermogravimetric analysis, differential thermal analysis, and microhardness tests were used for study. In a gas-atomized state, the powder consisted of BCC supersaturated solid solution. The high rate of heating and cooling and high oxygen concentration during spraying led to oxidation development prior to decomposition of the supersaturated solid solution. Depleted Al layers of BCC transferred to the FCC phase. An increase in the spraying distance resulted in an increase in α-Al2O3 content; however, higher oxide content does not result in a higher microhardness. In contrast, under annealing, the supersaturated BCC solid solution decomposition occurs earlier than pronounced oxidation, which leads to considerable strengthening to 910 HV.

Oxidation behavior of Y 0.1 -doped FeCoNiAlCrB high-entropy alloy

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

Unraveling the oxidation mechanism of Y-doped AlCoCrFeNi high-entropy alloy at 1100 °C

Effect of Al content on the oxidation behavior of Y/Hf-doped AlCoCrFeNi high-entropy alloy

Y-Hf co-doped Al1.1CoCr0.8FeNi high-entropy alloy with excellent oxidation resistance and nanostructure stability at 1200°C

Microstructure and oxidation behavior of the Y/Ta/Hf co-doped AlCoCrFeNi high-entropy alloys in air at 1100 °C

Y-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation resistance and structure stability at 1000°C and 1100°C

Y/Hf-doped Al0.7CoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance at 1200 °C

A comparative study on the oxidation behavior of Y-, Hf- and YHf-doped NiCoCrAl alloys: effect of reactive elements

Effect of Y-doping on the microstructural evolution and oxidation resistance of NiAlHf coatings at 1200 °C

Effect of Al content on the oxidation behavior of NiCoCrAlYHf alloys at 1100°C

High Temperature Oxidation Behavior of Al0.5CrCoFeNi High Entropy Alloy

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Microstructure transformation and high temperature oxidation properties of (FeCoNi)100-xAlx new-type high-entropy alloys

Oxidation Behavior of FeNiCoCrMo0.5Al1.3 High-Entropy Alloy Powder

Effect of Y on the Oxidation Behavior of a Directionally Solidified Ni-based Single Crystal Superalloy

New insights in the oxidation behavior of (FeCoCrNi)94Al4Ti2Si high entropy alloys at 1100 °C

Effect of Cr content on the high temperature oxidation behavior of FeCoNiMnCr x porous high-entropy alloys

Effect of Y on Microstructure and Properties of Al0.8FeCrCoNiCu0.5 High Entropy Alloy Coating on 5083 Aluminum by Laser Cladding

Oxidation behavior of AlCoCrFeNiSi high-entropy alloys at 1100 °C

Influences of Al content on oxidation behavior of CoNiCrAlYRe alloys