Abstract:We present a comparative study on oxidation behavior and failure mechanisms of conventional NiCoCrAl alloys doped with Y and Hf (CNA) and in-situ composite AlCoCrFeNi2.1 eutectic high-entropy alloy doped with Y and Hf (ISC-EHEA) at 1300 degrees C. We demonstrate that the ISC-EHEA has much stronger resistance to surface rumpling and oxide spallation than CNA. Hybrid molecular dynamics (MD) and Monte Carlo (MC) simulations show that the diffusion coefficients of the metal elements in the Al-depletion layer of the ISC-EHEA are 50 % lower than those in the CNA. The low diffusion coefficients lead to low growth stress in the thermally grown Al2O3 scale on the ISC-EHEA and improve the creep resistance of the metal in contact with the scale, thus preventing the occurrence of rumpling. The oxidation rate constant of the ISC-EHEA is similar to 32 % lower in comparison to those of the CNA, which is attributed to the coarser columnar Al2O3 grains that effectively mitigate grain boundary diffusion. The rumpling-free metal/oxide interface, the low residual stress and the low oxide growth rate for the ISC-EHEA result in strong resistance to scale spallation. Owing to the strong scale/alloy bonding at the interface and the build-up of strain energy during prolonged oxidation, damage in the Al2O3 scale on the ISC-EHEA is initiated as surface cracks rather than interface decohesion. When re-oxidized at 1300 degrees C, the ingress of oxygen along the surface cracks results in fast growth of new oxides at the metal/oxide interface, which causes local stress concentration, interface crack propagation and scale spallation.

Y-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation resistance and structure stability at 1000°C and 1100°C

Y-Hf co-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation and spallation resistance under thermal cycling conditions at 1100 °C and 1200 °C

Unraveling the oxidation mechanism of Y-doped AlCoCrFeNi high-entropy alloy at 1100 °C

Y-Hf co-doped Al1.1CoCr0.8FeNi high-entropy alloy with excellent oxidation resistance and nanostructure stability at 1200°C

Superior Oxidation Resistance of a Y-Hf Co-Doped Al18Co30Cr10Fe10Ni32 Eutectic High-Entropy Alloy at 1100-1300 °C

Y-Hf co-doped Al<sub>1.1</sub>CoCr<sub>0.8</sub>FeNi high-entropy alloy with excellent oxidation resistance and nanostructure stability at 1200 C

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

Y/Hf-doped Al0.7CoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance at 1200 °C

A Novel NiCoCrAlPt High-Entropy Alloy with Superb Oxidation Resistance at 1200 °C

Effect of Al content on the oxidation behavior of Y/Hf-doped AlCoCrFeNi high-entropy alloy

Microstructure and oxidation behavior of the Y/Ta/Hf co-doped AlCoCrFeNi high-entropy alloys in air at 1100 °C

High-temperature Oxidation Behavior of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy: Microstructure Evolution and Microhardness

Y/Hf-doped AlCoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance

Y-Hf Co-Doped AlCoCrFeNi High-Entropy Alloy Coating with Superior Oxidation and Spallation Resistance at 1100 °C

Oxidation behavior of Y 0.1 -doped FeCoNiAlCrB high-entropy alloy

Effect of Y-doping on the microstructural evolution and oxidation resistance of NiAlHf coatings at 1200 °C

Microstructure of Al1.3CrFeNi Eutectic High Entropy Alloy and Oxidation Behavior at 1000 °C

A comparative study on the oxidation behavior and failure mechanisms of conventional NiCoCrAl alloy and in-situ composite AlCoCrFeNi 2.1 eutectic high-entropy alloy at 1300 °C

A Comparative Study on the Oxidation Behavior and Failure Mechanisms of Conventional NiCoCrAl Alloy and In-Situ Composite AlCoCrFeNi2.1 Eutectic High-Entropy Alloy at 1300 °C

A novel AlCo1.2Cr0.8FeNi2.1 eutectic high entropy alloy with excellent corrosion resistance

Microstructure transformation and high temperature oxidation properties of (FeCoNi)100-xAlx new-type high-entropy alloys