Abstract:The existence mode of Y is an important factor affecting the oxidation resistance of NiCrAlY coating. The traditional thermal sprayed NiCrAlY coating had some problems such as internal-stress-induced coating peeling, when it was used at high temperature for a long time. In this paper, Y-modified NiCrAlY coatings were prepared on the surface of thermal-sprayed NiCrAlY coatings by halide-activated pack-cementation technology. The microstructure and oxidation resistance of the coatings after thermal insulation at 1100 °C for 100 h were analyzed. The results show that the oxidation resistance of Y-modified NiCrAlY coatings was improved significantly. When the oxidation temperature and time were 1100 °C and 100 h, the oxidation weight gain of thermal sprayed NiCrAl0.5Y and NiCrAl1.0Y coatings was 3.8 and 2.2 times that of Y-modified coatings, respectively. In addition, the NiCrAlY coatings prepared by pack cementation had better oxidation resistance than thermal sprayed coatings when the content of Y was equal. The oxidation resistance of the pack-cemented NiCrAlY coatings were increased with the increase in Y content when it was in a range of 0~1 wt.%. When oxidized at 1100 °C for 100 h, the oxidation weight gain of the pack-cemented NiCrAl0.5Y and NiCrAl1.0Y coatings was about 1.8 and 0.9 mg/cm2, respectively. The formation of highly stable intermetallic compounds Ni5Y in the pack-cemented Y-modified coatings is concluded to be the reason for improving the oxidation resistance of the coatings. This work can provide a solution to improve the oxidation resistance of traditional MCrAlY coatings.

Effect of Y-doping on the microstructural evolution and oxidation resistance of NiAlHf coatings at 1200 °C

Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

Effect of Al content on the oxidation behavior of NiCoCrAlYHf alloys at 1100°C

A comparative study on the oxidation behavior of Y-, Hf- and YHf-doped NiCoCrAl alloys: effect of reactive elements

Investigation on the microstructural evolution and oxidation resistance of Ru-doped NiAlHf coatings at 1200 °C

Effect of Al2O3 scales from pre-oxidation on the microstructural evolution and phase transition of NiAlHf coatings at 1200 °C

Y/Hf-doped Al0.7CoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance at 1200 °C

Effect of Al content on the oxidation behavior of Y/Hf-doped AlCoCrFeNi high-entropy alloy

Microstructural evolution and element interdiffusion of NiAlHf and NiAlHfY coatings deposited on a Ni-based superalloy

Oxidation behavior of Y 0.1 -doped FeCoNiAlCrB high-entropy alloy

Effect of Y on the Oxidation Behavior of a Directionally Solidified Ni-based Single Crystal Superalloy

Y-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation resistance and structure stability at 1000°C and 1100°C

Unraveling the oxidation mechanism of Y-doped AlCoCrFeNi high-entropy alloy at 1100 °C

Structural and High-Temperature Oxidation Performance of Al-Co-Y Co-deposited Coatings on a TiAl-Nb Alloy at Low Temperatures

Microstructure and oxidation behavior of the Y/Ta/Hf co-doped AlCoCrFeNi high-entropy alloys in air at 1100 °C

Study on Microstructure and Oxidation Resistance Mechanism of Y-modified NiCrAlY Coating Prepared by Pack Cementation

Unveiling the precipitation-induced high-temperature oxidation behavior in a Ni-Al-Y alloy

Y-Hf co-doped Al1.1CoCr0.8FeNi high-entropy alloy with excellent oxidation resistance and nanostructure stability at 1200°C

Investigation on the Oxidation Behavior of the NiCrAlY Bond-Coat with Low Al Content Sprayed by High Velocity Oxygen Fuel Method

Oxidation Behavior of Cast Ni3Al Alloys and Microcrystalline Ni3Al+5% Cr Coatings with and without Y Doping