Abstract:Eutectic high entropy alloys (EHEAs) have garnered much research attention due to their excellent mechanical properties, superior castability, good oxidation resistance, and stable microstructure in a wide range of temperatures. Inspires from mature Ni and Co-based superalloys, a novel Al20Co36Cr4Fe4Ni36 EHEA was designed and prepared to obtain good mechanical properties at both room temperature and high temperatures in this study. The novel EHEA consists of a L12 phase and a B2 phase with a superior ultra-tensile strength of 1005 ± 40 MPa and a ductility of 8.8 ± 0.4% at room temperature. The engineering compressive stress–strain curves at 1073 K indicated that the current EHEA performs a high strength of 321 ± 9 MPa without fracture even at a high temperature of ~0.6 TE, which is even superior to some refractory high entropy alloys (RHEAs). The hot deformation behavior and microstructure evolution of the new EHEA was investigated at the temperature range of 1073 K to 1273 K and various strain rates from 10−3 s−1 to 10−1 s−1. The constitutive equation that describes the correlations between the flow stress, strain rate, and temperatures was constructed. Continuous dynamic recrystallization (CDRX) was the primary dynamic recrystallization (DRX) mechanism in both the L12 and B2 phases during hot deformation. However, the proportion of dynamic recrystallization grains in the L12 phase is higher than that in the B2 phase according to the high angle grain boundaries (HAGBs) under the same deformation condition, suggesting that the CDRX kinetics was faster and stronger in the L12 phase. The present study provided a new thought for designing EHEAs and an insight into the hot deformation behavior of EHEAs with lamellar morphologies.

Y-Hf co-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation and spallation resistance under thermal cycling conditions at 1100 °C and 1200 °C

Y-Hf co-doped Al1.1CoCr0.8FeNi high-entropy alloy with excellent oxidation resistance and nanostructure stability at 1200°C

Y-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation resistance and structure stability at 1000°C and 1100°C

Y/Hf-doped Al0.7CoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance at 1200 °C

Unraveling the oxidation mechanism of Y-doped AlCoCrFeNi high-entropy alloy at 1100 °C

Effect of Al content on the oxidation behavior of Y/Hf-doped AlCoCrFeNi high-entropy alloy

A comparative study on the oxidation behavior and failure mechanisms of conventional NiCoCrAl alloy and in-situ composite AlCoCrFeNi 2.1 eutectic high-entropy alloy at 1300 °C

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Microstructure and oxidation behavior of the Y/Ta/Hf co-doped AlCoCrFeNi high-entropy alloys in air at 1100 °C

Microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloy synthesized by spark plasma sintering of gas-atomized powder

Al CoCrFeNi high entropy alloys with superior hot corrosion resistance to Na2SO4 + 25% NaCl at 900 °C

Thermal Stability and Hot Corrosion Performance of the AlCoCrFeNi2.1 High-Entropy Alloy Coating by Laser Cladding

Hot deformation characteristics and microstructure evolution of Al20Co36Cr4Fe4Ni36 eutectic high entropy alloy

High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure

Clarifying the effects of composition and phase stabilization on the oxidation resistance in AlCoCrFeNiTi series high-entropy alloys at 1100 °C

Microstructure and mechanical properties of Co-free AlCrFeNiTi 0.2 eutectic high-entropy alloy

A novel Co-free Al0.75CrFeNi eutectic high entropy alloy with superior mechanical properties

Microstructure, Mechanical Property, and Wear Behavior of NiAl-Based High-Entropy Alloy

Air plasma sprayed high-entropy AlCoCrFeNiY coating with excellent oxidation and spallation resistance under cyclic oxidation at 1050–1150 °C

High-strength AlCoCrFeNi2.1 eutectic high entropy alloy with ultrafine lamella structure via additive manufacturing

Nanostructured Oxide‐Dispersion‐Strengthened CoCrFeMnNi High‐Entropy Alloys with High Thermal Stability