Abstract:Eutectic high entropy alloys (EHEAs) have garnered much research attention due to their excellent mechanical properties, superior castability, good oxidation resistance, and stable microstructure in a wide range of temperatures. Inspires from mature Ni and Co-based superalloys, a novel Al20Co36Cr4Fe4Ni36 EHEA was designed and prepared to obtain good mechanical properties at both room temperature and high temperatures in this study. The novel EHEA consists of a L12 phase and a B2 phase with a superior ultra-tensile strength of 1005 ± 40 MPa and a ductility of 8.8 ± 0.4% at room temperature. The engineering compressive stress–strain curves at 1073 K indicated that the current EHEA performs a high strength of 321 ± 9 MPa without fracture even at a high temperature of ~0.6 TE, which is even superior to some refractory high entropy alloys (RHEAs). The hot deformation behavior and microstructure evolution of the new EHEA was investigated at the temperature range of 1073 K to 1273 K and various strain rates from 10−3 s−1 to 10−1 s−1. The constitutive equation that describes the correlations between the flow stress, strain rate, and temperatures was constructed. Continuous dynamic recrystallization (CDRX) was the primary dynamic recrystallization (DRX) mechanism in both the L12 and B2 phases during hot deformation. However, the proportion of dynamic recrystallization grains in the L12 phase is higher than that in the B2 phase according to the high angle grain boundaries (HAGBs) under the same deformation condition, suggesting that the CDRX kinetics was faster and stronger in the L12 phase. The present study provided a new thought for designing EHEAs and an insight into the hot deformation behavior of EHEAs with lamellar morphologies.

High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

A promising new class of high-temperature alloys: eutectic high-entropy alloys

High strength and ductility in a dual-phase hetero-structured AlCoCrFeNi2.1 eutectic high-entropy alloy by powder metallurgy

High-strength AlCoCrFeNi2.1 eutectic high entropy alloy with ultrafine lamella structure via additive manufacturing

Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy

New insight into tailorable eutectic high entropy alloys with remarkable strength–ductility synergy and ample shaping freedom fabricated using laser powder bed fusion

Microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloy synthesized by spark plasma sintering of gas-atomized powder

Study on the strengthening mechanism of AlCoCrFeNi2.1 eutectic high-entropy alloy

Microstructure and mechanical properties of Co-free AlCrFeNiTi 0.2 eutectic high-entropy alloy

Design of novel AlCoFeNiV high-entropy alloys with high-strength and high-ductility

High strength and ductility eutectic high entropy alloy with unique core-shell structure

Strength-ductility balance of AlCoCrFeNi 2.1 eutectic high-entropy alloy via additive manufacturing

A dual-phase alloy with ultrahigh strength-ductility synergy over a wide temperature range

Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure

A novel Co-free Al0.75CrFeNi eutectic high entropy alloy with superior mechanical properties

Hot deformation characteristics and microstructure evolution of Al20Co36Cr4Fe4Ni36 eutectic high entropy alloy

Realizing strength-ductility combination of Fe3.5Ni3.5Cr2MnAl0.7 high-entropy alloy via coherent dual-phase structure

A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength

Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength

A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures