Abstract:The study reported a novel L1 2 -strengthening NiCoCrAlTi high-entropy alloy (HEA) with an outstanding synergy of tensile strength and ductility at both ambient and high temperatures. The HEA was prepared by arc melting and cold-rolling, followed by isothermal aging at designed precipitation temperatures to achieve coexistence of recrystallized and non-recrystallized grains. Transmission electron microscopy (TEM) characterization revealed a high density of rod-like and spheroidal L1 2 precipitates distributing in the micro/nanograins and non-recrystallized regions in the annealed specimens. The yield stress, ultimate tensile stress, and ductility of the HEA were ∼1300 MPa, 1610 MPa, and 14 % at room temperature, respectively. Such excellent mechanical properties of ∼1060 MPa, 1271 MPa, and 25 % were maintained to 600 °C, which was superior to most reported HEAs and Co- and Ni-based superalloys to date. Systematic TEM analysis unveiled at low strain, the deformation mechanism was mainly controlled by dislocations and stacking faults (SFs). With the increase in strain, the deformation mode gradually transferred to dislocations, deformation twins (DTs), and SFs. Moreover, the complex interaction between SFs and L1 2 precipitates, including the shearing and blocking effects, was frequently observed, contributing to the high tensile strength. Thus, the extremely high tensile strength and sustained ductility at 600 °C mainly originate from the cooperation among interaction between L1 2 precipitation and dislocations and extensive SFs, DTs, immobile Lomer-Cottrell (L-C) locks formed from interactions between SFs and SFs/DTs, hierarchical SFs/DTs networks, as well as hetero-deformation-induced strengthening. Such a unique deformation mechanism breaks the strength-ductility trade-off of the HEA at high temperatures.

A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

A promising new class of high-temperature alloys: eutectic high-entropy alloys

Hot deformation characteristics and microstructure evolution of Al20Co36Cr4Fe4Ni36 eutectic high entropy alloy

High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure

Evolution of microstructure and mechanical properties of a novel CoCrFeNi2(TiSi)0.7 EHEA under different annealing conditions

A novel Co-free Al0.75CrFeNi eutectic high entropy alloy with superior mechanical properties

Microstructure and mechanical properties of Co-free AlCrFeNiTi 0.2 eutectic high-entropy alloy

High-strength AlCoCrFeNi2.1 eutectic high entropy alloy with ultrafine lamella structure via additive manufacturing

Microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloy synthesized by spark plasma sintering of gas-atomized powder

A novel Fe-rich Fe-Cr-Ni-Si-Al high-entropy alloy with low-cost and outstanding as-cast mechanical properties

High strength and ductility eutectic high entropy alloy with unique core-shell structure

New insight into tailorable eutectic high entropy alloys with remarkable strength–ductility synergy and ample shaping freedom fabricated using laser powder bed fusion

A novel L1 2 -strengthened single crystal high entropy alloy with excellent high-temperature mechanical properties

Magnificent tensile strength and ductility synergy in a NiCoCrAlTi high-entropy alloy at elevated temperature

Novel ultra-high aluminum content eutectic high entropy alloys with duplex-reinforced phases and labyrinthine structure

An unprecedented synergy of high-temperature tensile strength and ductility in a NiCoCrAlTi high-entropy alloy

Design of novel AlCoFeNiV high-entropy alloys with high-strength and high-ductility

Designing novel AlCoCrNi eutectic high entropy alloys

Study on the strengthening mechanism of AlCoCrFeNi2.1 eutectic high-entropy alloy

Deformation Behaviors of an Additive-Manufactured Ni32Co30Cr10Fe10Al18 Eutectic High Entropy Alloy at Ambient and Elevated Temperatures