Abstract:Eutectic high entropy alloys (EHEAs) have garnered much research attention due to their excellent mechanical properties, superior castability, good oxidation resistance, and stable microstructure in a wide range of temperatures. Inspires from mature Ni and Co-based superalloys, a novel Al20Co36Cr4Fe4Ni36 EHEA was designed and prepared to obtain good mechanical properties at both room temperature and high temperatures in this study. The novel EHEA consists of a L12 phase and a B2 phase with a superior ultra-tensile strength of 1005 ± 40 MPa and a ductility of 8.8 ± 0.4% at room temperature. The engineering compressive stress–strain curves at 1073 K indicated that the current EHEA performs a high strength of 321 ± 9 MPa without fracture even at a high temperature of ~0.6 TE, which is even superior to some refractory high entropy alloys (RHEAs). The hot deformation behavior and microstructure evolution of the new EHEA was investigated at the temperature range of 1073 K to 1273 K and various strain rates from 10−3 s−1 to 10−1 s−1. The constitutive equation that describes the correlations between the flow stress, strain rate, and temperatures was constructed. Continuous dynamic recrystallization (CDRX) was the primary dynamic recrystallization (DRX) mechanism in both the L12 and B2 phases during hot deformation. However, the proportion of dynamic recrystallization grains in the L12 phase is higher than that in the B2 phase according to the high angle grain boundaries (HAGBs) under the same deformation condition, suggesting that the CDRX kinetics was faster and stronger in the L12 phase. The present study provided a new thought for designing EHEAs and an insight into the hot deformation behavior of EHEAs with lamellar morphologies.

Evolution of microstructure and mechanical properties of a novel CoCrFeNi2(TiSi)0.7 EHEA under different annealing conditions

Evolution of Microstructure and Mechanical Properties of a Novel CoCrFeNi2(TiSi)0.7 Eutectic High‐Entropy Alloys under Different Annealing Conditions

Tailoring Phase Transformation and Precipitation Features in a Al21Co19.5Fe9.5Ni50 Eutectic High-Entropy Alloy to Achieve Different Strength-Ductility Combinations

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Microstructure and mechanical properties of Co-free AlCrFeNiTi 0.2 eutectic high-entropy alloy

Hot deformation characteristics and microstructure evolution of Al20Co36Cr4Fe4Ni36 eutectic high entropy alloy

A Novel Equiaxed Eutectic High-Entropy Alloy with Excellent Mechanical Properties at Elevated Temperatures

Microstructure and Mechanical Properties of Bulk Annealed AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

Microstructure Evolution and Mechanical Properties of an Annealed Dual-Phase CrFeCoNiAl0.7 High-Entropy Alloy

Microstructural Evolution Mediated Creep Deformation Mechanism for the AlCoCrFeNi2.1 Eutectic High-Entropy Alloy under Different Testing Conditions

Microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloy synthesized by spark plasma sintering of gas-atomized powder

A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties

Thermal modification of brittle CoFeNi2(Ti3Si5)0.16 eutectic high-entropy alloy by annealing treatment

Microstructure evolution and mechanical properties of CrFeNixV0.64Ta0.36 eutectic high-entropy alloys

Microstructural Evolution and Tensile Properties of Al0.3CoCrFeNi High-Entropy Alloy Associated with B2 Precipitates

A promising new class of high-temperature alloys: eutectic high-entropy alloys

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Achieving superior strength-ductility balance of Co–Cr–Fe–Ni high entropy alloy via annealing

A novel Co-free Al0.75CrFeNi eutectic high entropy alloy with superior mechanical properties

Microstructure and Mechanical Properties of a CoFeNi 2 V 0.5 Nb 0.75 Eutectic High Entropy Alloy in As-cast and Heat-treated Conditions