Abstract:The development of alloys with good combinations of strength-ductility and corrosion resistance is a long-standing research theme for advanced materials engineering, which also holds true for the newly emerged high-entropy alloys (HEAs). Here, Ni/Ti-rich precipitates and heterogeneous structure were introduced for the primary purpose of improving strength-plasticity synergy of a Co-free Fe4Ni4Mn2CrTi HEA with good anti-corrosion performance. Specifically, four typical states of this HEA were tailored and compared, including i) as-cast, ii) homogenized, iii) post deformation annealing (PDA) sample with heterogeneous structure and iv) PDA sample with homogeneous structure. The structural features, mechanical properties, and underlying phase transformation mechanisms were systematically investigated. Phase transformation of η-D024 to γ′-L12 was realized during annealing treatments, based on the intrinsic stacking faults formed by repeating removal of the (0001) planes in the η structure. Compared with the homogenized counterpart, the strength-ductility synergy was achieved in the alloy iv, showing an evident increment of ∼43.4% in yield strength ( σ 0.2 ) and ∼57.8% in ultimate tensile strength ( σ U T S ), respectively, resulting from solid-solution strengthening, grain-boundary strengthening and precipitation strengthening, yet without sacrificing ductility. Good combinations of strength and ductility were also achieved in the alloy iii with heterogeneous structure, possessing an even higher σ 0.2 and σ U T S yet maintaining a moderate elongation, whose strength contribution from hetero-deformation induced hardening is recognized as a significant strengthening mechanism. Additionally, in comparison with the conventional corrosion-resistant 304 stainless steel, compact TiO2 and Cr2O3 in the passive film give rise to more superior anti-corrosion properties of the homogenized HEA. This paper provides a new paradigm in the controllable design of novel low-cost high-performance HEAs for achieving their potential structural and functional engineering applications.

Microstructural evolution and mechanical behavior of Co‐free (Fe40Ni30Cr20Al10)100‐x Ti x high‐entropy alloys

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Microstructure and tensile properties of Co-free Fe4CrNi(AlTi) high-entropy alloys

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Microstructural optimization of Fe x CrNiAl 0.5 Ti 0.5 high entropy alloys toward high ductility

Excellent strength-ductility in Ti-alloyed Fe35Ni35Cr20Mn10 high-entropy alloy

Microstructure evolution and strengthening mechanisms in Ni36Co30Cr11Fe11Al12-xNbx high entropy alloys

Microstructure and Properties of Non-Equiatomic Ni10Cr6WFe9TiAlx High-Entropy Alloys Combined with High Strength and Toughness

Effects of Ti addition and annealing on microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy

Effects of Ti Content on the Microstructure and Mechanical Properties of Al0.2CoCrFeNi2Tix High-Entropy Alloys

Evolution of microstructure and mechanical characteristics of (CrFeNiCu)100–xTix high-entropy alloys

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Influences of Ti additions on the microstructure and tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy

Microstructural evolution, mechanical and corrosion behavior of an Al7.5Co20.5Fe24Ni24Cr24 high‐entropy alloy

Microstructural evolution and mechanical properties of novel nanoparticles strengthened CoCrFeNi based high entropy alloy

Microstructure and mechanical properties of Co-free AlCrFeNiTi 0.2 eutectic high-entropy alloy

Realizing good combinations of strength-ductility and corrosion resistance in a Co-free Fe4Ni4Mn2CrTi high-entropy alloy via tailoring Ni/Ti-rich precipitates and heterogeneous structure

Microstructure and mechanical properties variation with Ni content in Al0.8CoCr0.6Fe0.7Nix (x = 1.1, 1.5, 1.8, 2.0) eutectic high-entropy alloy system

Mechanical properties and wear behaviors of FeCoNiCrMnTix high-entropy alloys manufactured by vacuum arc melting