Abstract:An atmospheric pressure mist chemical vapor deposition (mist-CVD) system has been developed to prepare zinc oxide (ZnO)-based thin films. This is a promising method for large-area deposition at low temperatures taking into account of its simplicity, inexpensiveness, and safety. Nominally pure ZnO, Al-doped n-type ZnO (ZnO:Al), and N-doped p-type ZnO (ZnO:N) thin films, as well as Zn1−xCdxO and Zn1−yMgyO alloy films, have been deposited by this mist-CVD system. The films deposited at the temperatures ranging from 400 to 500°C were of an acceptable crystallinity with (002) preferential orientation and homogeneous surface. All the films exhibited high transmittance of about 90% in visible regions and dominant UV emission in the photoluminescence spectra. The n-type ZnO:Al films had a low resistivity of 1.08×10–3Ωcm at an optimal Al content of 4at%. The p-type conductivity was obtained in ZnO:N films annealed at higher temperatures with a resistivity of 72.8Ωcm, Hall mobility of 2.28cm2V−1s−1, and hole concentration of 3.76×1016cm−3, as confirmed by Hall-effect measurements. A hydrogen-assisted nitrogen-doping mechanism was proposed to answer for the realization of p-type conductivity in ZnO. The films of Zn1−xCdxO and Zn1−yMgyO ternary alloys were also deposited by this technique. The band gap energies, for instance, were 3.05eV for Zn1−xCdxO (x=0.06), 3.28eV for ZnO, and 3.56eV for Zn1−yMgyO (y=0.11), as confirmed by the optical absorption spectra. The band gap engineering could be readily realized in the ZnO system using mist-CVD.

P-Type Zno Thin Films Prepared by Oxidation of Zn3n2 Thin Films Deposited by Dc Magnetron Sputtering

P-type Tin–indium Oxide Films Prepared by Thermal Oxidation of Metallic InSn Alloy Films

Zno-based Thin Films Synthesized by Atmospheric Pressure Mist Chemical Vapor Deposition

Preparation and Characteristics of P-Type Zno Films by Dc Reactive Magnetron Sputtering

P-Type ZnO Thin Films Fabricated by Dc Magnetron Reactive Sputtering Method at Different Substrate Temperatures

P-type ZnO:N Films Prepared by Thermal Oxidation of Zn 3 N 2

Microstructure and Optical Properties of ZnO Films Deposited by Radio-frequency Reactive Magnetron Sputtering

Electrical And Structural Properties Of P-Type Zno : N Thin Films Prepared By Plasma Enhanced Chemical Vapour Deposition

Fabrication and Characteristics of the Low-Resistive P-Type ZnO Thin Films by DC Reactive Magnetron Sputtering

Preparation and Characteristics of p-Type ZnO Films Using Al and N Codoping Method by DC Reactive Magnetron Sputtering

Magnetron-Sputtered SnO Thin Films for p-Type and Ambipolar TFT Applications

High Quality P-Type Zno Film Growth by A Simple Method and Its Properties

P-Type Conversion of Zno Thin Films by Plasma Immersion Ion Implantation

Fabrication of P-Type ZnO Thin Films Via DC Reactive Magnetron Sputtering by Using Na As the Dopant Source

Preparation of P-Type ZnO Films by Al+N-codoping Method

P-Type Zno Films Deposited by Dc Reactive Magnetron Sputtering at Different Ammonia Concentrations

P-Type Conductivity and Stability of Nitrogen-Doped Zinc Oxide Prepared by Magnetron Sputtering

Research of Deposition Condition and Structural Properties of ZnO Films Grown by RF Magnetron Sputtering

Preparation and Properties of N-Doped P-Type ZnO Films by Solid-Source Chemical Vapour Deposition with the C -Axis Parallel to the Substrate

Achieve p -type conduction in N-doped and (Al,N)-codoped ZnO thin films by oxidative annealing zinc nitride precursors

Room-temperature ferromagnetism in p-type (Mn, N)-codoped ZnO thin films achieved by thermal oxidation of sputtered Zn<sub>3</sub>N<sub>2</sub>:Mn films