Abstract:This paper presents a dual-mode multiband transceiver with DigRF interface implemented in a 0.13-μm CMOS technology. Based on direct conversion architecture, blocks in the transceiver can be configured to simultaneously support wavelength code-division multiple access (WCDMA) band I and four Global System for Mobile Communications (GSM) bands (PCS/DCS/GSM900/GSM850). In the receiver path, the narrowband radio-frequency front-end is comprised of multiple-gated low-noise amplifiers with capacitive desensitization and current-mode passive mixers with the proposed second-order input intercept point (IIP2) calibration to comply for surface-acoustic-wave-less application. In the transmitter path, a high-linearity mixer and parallel Class-AB PA driver are adopted. Low-noise wideband frequency synthesizers with adaptive frequency calibration are proposed to cover all modes and bands. This reconfigurable transceiver achieves -5.6/-2/-6 dBm in-band third-order intercept point for WCDMA/GSM HB/GSM LB respectively, and >;65 dBm IIP2. At the maximum output power, the transmitter achieves 2.3% rms error vector magnitude for WCDMA I and 1.67° phase error for a GSM system.

Design of a Low-Power CMOS Baseband Circuit for Wideband CDMA Testbed

A Low-Power Low-Noise Direct-Conversion Front-End with Digitally Assisted IIP2 Background Self Calibration

A C-Band Four-Channel Receiver with Current-Sharing and Large-Signal Multigated-Transistor Techniques in 65-Nm CMOS

A Low-Power High-Linearity Cmos Baseband Filter for Wideband Cdma Applications

Analog baseband for WCDMA implementation by using digital-controlled DC Offset Cancellation

A 130nm CMOS direct conversion transmitter for WCDMA

Design of a High-Linearity RF Front-End with IP2 Calibration for SAW-less WCDMA Receivers.

A Reconfigurable Baseband Circuit Applied for Wimax Low-If Receivers

A Reconfigurable Analog Base Band Circuit Used in Wide Band System

Cmos Low-Power Analogue Baseband Circuits for a Non-Coherent Low Data Rate IR-UWB Receiver

CMOS Highly Linear Direct-Conversion Transmitter for WCDMA with Fine Gain Accuracy

A Reconfigurable Analog Baseband Circuit for Wlan, Wcdma, and Bluetooth

Analysis and Design of a High-Linearity Receiver RF Front-End with an Improved 25%-Duty-cycle LO Generator for WCDMA/GSM Applications

A Dual-Mode Analog Baseband Utilizing Digital-Assisted Calibration for WCDMA/GSM Receivers

A Baseband Lpf for Gsm, Td-Scdma and Wcdma Multi-Mode Transmitters

A Wide Tuning Range Low-Pass Gm-C Filter for Multi-Mode Wireless Receivers with Automatic Frequency Calibration

A 0.13&#x03bc;m CMOS UWB Receiver Front-End Using Passive Mixer

Optimizing Mixer Noise Performance: A 2.4 Ghz Gilbert Downconversion Mixer for W-Cdma Application

A Low-Power WCDMA Transmitter With an Integrated Notch Filter

A Low Power 3–5 GHz CMOS UWB Receiver Front-End

A High-Linearity WCDMA/GSM Reconfigurable Transceiver in 0.13- CMOS