Abstract:Laser powder bed fusion (LPBF) allows the fabrication of complex parts with high resolution. In the process of manufacturing complex parts, overhanging structures with unique mechanical properties are inevitable. The mechanical properties are relevant to the microstructure that are severely influenced by the support structures and build orientation. In this study, a three-dimensional finite element model was established to numerically investigate the thermal behavior of the melt pool in the overhanging structures, and the effects of different forming conditions on tensile behavior were analyzed through the microstructure of overhanging specimens and fracture surfaces of failed specimens. The simulation results show that the change trend of the melt pool size is the same as that of the maximum temperature. Moreover, the melt pools closer to the down-facing surface of overhanging structures carry higher temperature and larger size. The application of the support structures effectively reduces the temperature of the melt pool in the starting layer by 5.3%. With the increase of inclination angle, the melt pool temperature in the starting layer decreases slightly. The experimental results indicate that the mechanical properties of 45° specimens fabricated above the entity are stronger than those of 45° specimens with support structures, and the mechanical properties of 45° specimens with support structures are stronger than those of 45° specimens without support structures. Moreover, the mechanical properties of the specimens deteriorate when the build orientation of the overhanging structures varies from 0° to 45°. The mechanical properties of different specimens with 45° build orientation are mainly affected by the thickness of defect area, and the mechanical properties of the specimens with different build orientations are mainly affected by fracture path. The results will facilitate the understanding and application of the LPBF manufacturing technique for overhanging structures in complex parts.

Effect of the Boundary Orientation of Melt Pool on Mechanical Property and Fracture Path in Selective-Laser-Melted AlSi10Mg Alloy

Deformation effect of melt pool boundaries on the mechanical property anisotropy in the SLM AlSi10Mg

Fatigue performance and crack propagation behavior of selective laser melted AlSi10Mg in 0°, 15°, 45° and 90° building directions

Effect of microstructural evolution on mechanical properties and fracture modes of AlSi10Mg blocks fabricated by selective laser melting after stress relief annealing

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Cracking Behavior, Microstructure and Properties of Selective Laser Melted Al-Mn-Mg-Sc-Zr Alloy

Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion

In-situ tensile testing of fracture and strain in a selective laser melted AlSi10Mg alloy

Effect of construction angles on microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Tensile behavior of AlSi10Mg overhanging structures fabricated by laser powder bed fusion: Effects of support structures and build orientation

High Cycle Fatigue Performance of AlSi10mg Alloy Produced by Selective Laser Melting

Influence of Manufacturing Geometric Defects on the Mechanical Properties of AlSi10Mg Alloy Fabricated by Selective Laser Melting

Effects processing parameters and building orientation on the microstructural and mechanical properties of AlSilOMg parts printed by selective laser melting

The effect of a remelting treatment scanning strategy on the surface morphology, defect reduction mechanism, and mechanical properties of a selective laser-melted Al-based alloy

The Effect of Silicon Phase Morphology on Microstructure and Properties of AlSi10Mg Alloys Fabricated by Selective Laser Melting

Effect of building orientations and heat treatments on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties, fracture mechanism and corrosion behavior

Effect of Heat Treatment on Microstructure and Properties of Selective Laser Melting AlSi10Mg Alloy

Study on microstructure and properties of selective laser melting formed AlSi10Mg alloy

The AlSi10Mg Samples Produced by Selective Laser Melting: Single Track, Densification, Microstructure and Mechanical Behavior