Abstract:Ultra-precision thinning technology using workpiece self-rotational grinding followed by chemical mechanical polishing (CMP) is extensively applied in the integrated circuit manufacturing process, which enables to obtain large size ultra-thin silicon wafers with high material removal rate and low damage layer thickness. However, an in-depth understanding of the influence caused by ground surface topography on material removal mechanism in silicon CMP process has not been revealed yet. This work systematically investigates the contact characteristics of the wafer-pad interface and corrosion behaviors of the ground silicon wafer immersed in polishing solution. Firstly, some silicon wafers are ground using different wheels and subsequently polished. The material removal depth during the whole CMP process is measured. Then, the intrinsic model of polishing pad is determined via mechanical property tests. A finite element method is adopted to evaluate the contact status, displacement distortion and stress distribution at the contact region between pad and ground wafer surface. Moreover, the chemical reaction mechanism between ground silicon wafer and polishing solution is revealed by utilizing X-ray photoelectron spectroscopy and electrochemical analysis. The influence of wafer surface topography on corrosion resistance in CMP process is illustrated. Finally, corresponding experimental results are explained from an atomic scale by a ReaxFF reactive molecular dynamics simulation model. This presented study demonstrates the corrosion promotion principle of ground silicon wafer in CMP process.

The effect of slurry pH on the chemical mechanical planarization of a carbon-doped Ge 2 Sb 2 Te 5 phase change material

Research on CMP Process Parameters Effect on Slurry Transport

Chemical Roles on Cu-slurry Interface During Copper Chemical Mechanical Planarization

Slurry components in metal chemical mechanical planarization (CMP) process: A review

Chemical effects on the tribological behavior during copper chemical mechanical planarization

Chemical mechanical polishing: Theory and experiment

Mechanism and Applications of Chemical and Mechanical Polishing

Slurry Parameters Effect on Chemical-Mechanical Planarisation (CMP) of Deposited Silver (ag) on Chips

Enhancing Ceria Slurry Performance for Shallow Trench Isolation Chemical Mechanical Polishing Through Non-Ionic Surfactant Addition

Study on Chemical Mechanical Polishing Performances of Sapphire Wafer (0001) Using Silica-Based Slurry

Investigation of Polisher Head and Slurry Sweep Effect in Oxide Film Polishing

Research on Polishing Performances and Mechanisms of CeO2/SiO2 Composite Abrasives

Electrochemical Analysis of the Slurry Composition for Chemical Mechanical Polishing of Flexible Stainless-Steel Substrates

Galvanic Corrosion Caused by Device Structure in Chemical Mechanical Planarization

Effect of slurry composition on the chemical mechanical polishing of thin diamond films

Effects of grinding-induced surface topography on the material removal mechanism of silicon chemical mechanical polishing

Analysis on Pad Effects in Chemical Mechanical Polishing

Micro-Polar Effects of Flow Features of Slurries in Chemical Mechanical Polishing Process

Characteristics of Slurry Recycling in Chemical Mechanical Polishing (CMP) of Fused Silica (FS)

Effects of Nano-Scale Particles in Chemical Mechanical Polishing Process

Material Removal Mechanism of Copper CMP from a Chemical–Mechanical Synergy Perspective