Abstract:The colloidal silica is used as the abrasive for the copper Chemical Mechanical Polishing slurry in integrated circuit multilayer copper wiring. The aggregation of colloidal silica in the slurries tends to aggregate spontaneously, resulting in the continuous changes of the polishing effect, such as scratch defects, removal rate, etc. This situation can lead to the potential instability of the polishing slurry, which should be avoided in industrial production. In this paper, the aggregation and dispersion properties of polishing slurries were systematically studied, and an scheme was proposed to improve the dispersion of slurries to prevent agglomeration. These affecting factors including slurries’ pH, Potassium nitrate and Sodium Polyacrylate were assessed with Large particle counts, Zeta potential and Particle size. Slurry’s pH at 9.6 had a lower Zeta potential which meant a higher dispersion colloidal silica compared to other pH of slurries. And the dissolution of colloidal silica was verified by UV-vis experiment. Sodium dodecyl sulfate, Dodecyl trimethyl ammonium chloride and Primary Alcobol Ethoxylate-15 were analyzed for their dispersion in slurries from the point of view of static electricity and steric hindrance, and the synergistic mechanism of mixed Sodium dodecyl sulfate and Primary Alcobol Ethoxylate-15 on slurries dispersion was highlighted. In addition, the effect of the improvement of slurry dispersion on reducing scratching defects on the surface of polished copper blanket was also tested in this paper.

Slurry Parameters Effect on Chemical-Mechanical Planarisation (CMP) of Deposited Silver (ag) on Chips

Slurry components in metal chemical mechanical planarization (CMP) process: A review

Methods and Mechanistic Analysis of Improving the Dispersion of Nano Silica Colloidal Particles in Chemical Mechanical Polishing Slurries

Chemical Mechanical Polishing of Aluminum Alloys using Alumina-Based Slurry

Chemical processes in the chemical mechanical polishing of copper

Chemical Mechanical Planarization of Copper Using Ethylenediamine and Hydrogen Peroxide Based Slurry

Optimizing of the Colloidal Dispersity of Silica Nanoparticle Slurries for Chemical Mechanical Polishing

Mechanism and Applications of Chemical and Mechanical Polishing

Chemical Roles on Cu-slurry Interface During Copper Chemical Mechanical Planarization

A review: research progress of chemical–mechanical polishing slurry for copper interconnection of integrated circuits

The Influence of Slurry Containing Polystyrene Particles on Copper Chemical Mechanical Planarization

Role of the Adhesion Force During Copper Chemical Mechanical Planarization

Mechanisms of Chemically Promoted Material Removal Examined for Molybdenum and Copper CMP in Weakly Alkaline Citrate-Based Slurries

Material Removal Mechanism of Copper CMP from a Chemical–Mechanical Synergy Perspective

Chemical mechanical polishing: Theory and experiment

Electrochemical Analysis of the Slurry Composition for Chemical Mechanical Polishing of Flexible Stainless-Steel Substrates

XPS, UV–vis Spectroscopy and AFM Studies on Removal Mechanisms of Si-face SiC Wafer Chemical Mechanical Polishing (CMP)

Chemical effects on the tribological behavior during copper chemical mechanical planarization

Effect of slurry composition on the chemical mechanical polishing of thin diamond films

Copper chemical mechanical polishing using a slurry-free technique

Chemical Mechanical Planarization (cmp) of On-Axis Si-Face Sic Wafer Using Catalyst Nanoparticles in Slurry