Abstract:Proton ceramic fuel cells offer numerous advantages compared with conventional fuel cells. However, the practical implementation of these cells is hindered by the poor sintering activity of the electrolyte. Despite extensive research efforts to improve the sintering activity of BCZY, the systematic exploration of the utilization of NiO as a sintering additive remains insufficient. In this study, we developed a novel BaCe0.55Zr0.35Y0.1O3-δ (BCZY) electrolyte and systematically investigated the impact of adding different amounts of NiO on the sintering activity and electrochemical performance of BCZY. XRD results demonstrate that pure-phase BCZY can be obtained by sintering the material synthesized via solid-state reaction at 1400 °C for 10 h. SEM analysis revealed that the addition of NiO has positive effects on the densification and grain growth of BCZY, while significantly reducing the sintering temperature required for densification. Nearly fully densified BCZY ceramics can be obtained by adding 0.5 wt.% NiO and annealing at 1350 °C for 5 h. The addition of NiO exhibits positive effects on the densification and grain growth of BCZY, significantly reducing the sintering temperature required for densification. An anode-supported full cell using BCZY with 0.5 wt.% NiO as the electrolyte reveals a maximum power density of 690 mW cm−2 and an ohmic resistance of 0.189 Ω cm2 at 650 °C. Within 100 h of long-term testing, the recorded current density remained relatively stable, demonstrating excellent electrochemical performance.

Ionic conductivity increase by one order of magnitude in BCY composite electrolyte added with Li 2 O

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Designing Proton Conducting Electrolytes for Low-Temperature Ceramic Fuel Cells

Cyo-Bzcyo Composites With Enhanced Proton Conductivity: Candidate Electrolytes For Low-Temperature Solid Oxide Fuel Cells

A New Composite Proton Conductor As a High-Performance Electrolyte Toward Low-Temperature Protonic Ceramic Cells

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells

Performance of BaCe0.8Y0.2O3-δ Proton Electrolyte Materials for Solid Oxide Fuel Cells by Compositing the Transition Metal Oxide NiO

Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte

Efficiently enhance the proton conductivity of YSZ-based electrolyte for low temperature solid oxide fuel cell

Composite electrolyte used for low temperature SOFCs to work at 390°C

Enhancing the sinterability and electrical properties of BaZr<sub>0.1</sub>Ce<sub>0.7</sub>Y<sub>0.2</sub>O<sub>3-</sub>proton-c onducting ceramic electrolyte

Enhancing the Sinterability and Electrical Properties of BaZr0.1Ce0.7Y0.2O3‐δ Proton‐conducting Ceramic Electrolyte

High Performance Dense Proton Ceramic Electrolyte Material

Compositing protonic conductor BaZr0.5Y0.5O3 (BZY) with triple conductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) as electrolyte for advanced solid oxide fuel cell

Effect of NiO Addition on the Sintering and Electrochemical Properties of BaCe0.55Zr0.35Y0.1O3-δ Proton-Conducting Ceramic Electrolyte

Towards Highly Dense Electrolytes at Lower Sintering Temperature (∼1200 °C): Optimization Strategies for BaCe0.7Zr0.1CuxY0.2-xO3-δ in SOFCs

Influence of Triple Sintering Additives (Bao-Cuo-b2o3) on the Sintering Behavior and Conductivity of the Proton-Conducting BaZr0.1Ce0.7Y0.2O3−δ Electrolyte Sintered at 1150 °C

Improved mechanical strength, proton conductivity and power density in an ‘all-protonic’ ceramic fuel cell at intermediate temperature

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells