Abstract:It is generally known that a layer of amorphous silicon oxide (SiO2) naturally exists on the surface of silicon, resulting in the growth of gallium oxide (Ga2O3) that is no longer affected by substrate crystallinity during sputtering. This work highlights the formation energy between the native amorphous nano-oxide film formed on the Si substrate and monoclinic β-Ga2O3 dominating the preferred orientation prepared for deep ultraviolet photodetectors. The latter were deposited on p-type silicon (p-Si) with (111) orientation using radio frequency sputtering at 600 °C and post rapid thermal annealing (RTA). The X-ray diffraction (XRD) results indicate both as-deposited and postannealing films with the (400) preferred orientation for a layer thickness of 100 nm. However, slight random orientation with the amorphous structure is mixed in the preferred one for the as-deposited film with a thickness of 200 nm and reduced after being annealed at 800 °C, which is observed by XRD and transmission electron microscopy. Meanwhile, thermal-induced massive twin boundaries (TBs) and stacking faults (SFs) were generated when annealed at 1000 °C, owing to the relaxation of lattice strain by the coherent interface. The interfacial bonding energy per unit area (E i) between β-Ga2O3 films with various facets ((001), (010), (100), and (2̅01)) and amorphous SiO2 was calculated using density functional theory. The E i of β-Ga2O3 (100)/SiO2 reveals the highest value (0.289 eV/Å2), which is consistent with the (100) preferred orientation of deposited films. The (100) preferred orientation is the driving force for TBs and SFs. The discrimination of responsivities and the photo/dark current contrast ratio (I ph/I dark) are inversely proportional to the amorphous structure, grain boundaries, TBs, and SFs. Therefore, optimum metal-semiconductor-metal photodetector performance is achieved for RTA-treated samples at 800 °C with an I ph/I dark of 3.91 × 102 and a responsivity of 0.702 A/W (λpeak = 230 nm) at 5 V bias for a 200 nm thin film.

Pt thermal atomic layer deposition for silicon x-ray micropore optics

Anti-reflection Coating at 550 Nm Fabricated by Atomic Layer Deposition

Precise broad-band anti-refection coating fabricated by atomic layer deposition

Silicon dioxide atomic layer deposition at low temperature for PDMS microlenses coating

Uniform broad-area deposition and patterning of SiO2 nanofilms by 172 nm photochemical conversion of liquid tetraethoxysilane layers at 300 K

Deep reactive ion etched anti-reflection coatings for sub-millimeter silicon optics

Tuning the peak position of subwavelength silica nanosphere broadband antireflection coatings.

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Atomic layer etching of SiO$_2$ using sequential exposures of Al(CH$_3$)$_3$ and H$_2$/SF$_6$ plasma

Influence of Surface Preparation on Atomic Layer Deposition of Pt Films

Pt-Al2O3 dual layer atomic layer deposition coating in high aspect ratio nanopores

Improvement of imaging performance of silicon micropore X-ray optics by ultra long-term annealing.

Facile Fabrication of Pt, Pd and Pt−Pd Alloy Films on Si with Tunable Infrared Internal Reflection Absorption and Synergetic Electrocatalysis

Role of Interfacial Oxide in the Preferred Orientation of Ga2O3 on Si for Deep Ultraviolet Photodetectors

Anodizing process of Al films on Si substrates for forming alumina templates with short-distance ordered 25 nm nanopores

Optimization of PECVD silicon oxynitride films for anti-reflection coating

Amorphous silicon-doped titania films for on-chip photonics

Controlling Pt nanoparticle sintering by sub-monolayer MgO ALD thin films

Design and fabrication of multilayer antireflection coating for optoelectronic devices by plasma enhanced chemical vapor deposition

Spatial resolution in thin film deposition on silicon surfaces by combining silylation and UV/ozonolysis

Morphological and Optical Properties of Silicon Nanoholes Produced by Pt-nanoparticles Assisted Chemical Etching