Abstract:In recent years, considerable attention has focused on high-performance and flexible crystalline metal oxide thin-film transistors (TFTs). However, achieving both high performance and flexibility in semiconductor devices is challenging due to the inherently conductive and brittle nature of crystalline metal oxide. In this study, we propose a facile way to overcome this limitation by employing a junctionless (JL) TFT structure via oxygen plasma treatment of the crystalline indium-tin oxide (ITO) films. The oxygen plasma treatment significantly reduced oxygen vacancies in the ITO films, contributing to the significant reduction in the carrier concentration from 4.67 × 1020 to 1.39 × 1016. Importantly, this reduction was achieved without inducing any noticeable structural changes in the ITO, enabling the successful realization of ITO JL TFTs with an adjustable threshold voltage. Furthermore, the ITO JL TFTs demonstrate good stability and reliability under various bias stress conditions, aging in the air atmosphere, and high-temperature processes. In addition, the ITO JL TFTs exhibit low light sensitivity due to the wide bandgap of ITO and further suppression of Vo defects, making them suitable for applications requiring stable performance under light exposure. To compare and analyze the flexibility of the JL structure and conventional structure with additional source/drain (S/D) junction in ITO TFTs with nonencapsulation, we utilized mechanical simulations and transmission line method (TLM). By employing the JL structure in ITO TFT through carefully optimized oxygen plasma treatment, we successfully mitigated stress concentration at the S/D-channel interface. This resulted in a JL ITO TFT that exhibited a change in contact resistance of less than 20% even after 20,000 bending cycles. Consequently, a stable and flexible ITO TFT with field-effect mobility (μFE) of 12.74 cm2/(V s) was realized, outperforming conventionally structured ITO TFTs with additional S/D junction, where the contact resistance nearly tripled.

Performance Variation According to Device Structure and the Source/Drain Metal Electrode of a-IGZO TFTs

Influence of Source and Drain Contacts on the Properties of the Indium-Zinc Oxide Thin-Film Transistors Based on Anodic Aluminum Oxide Gate Dielectrics

Effect of Source/ Drain Electrode Fabrication Technology on the Electrical Properties of Solution-processed A-IGZO Based Transistors

Influence of metallization process on solution-processed InGaZnO thin film transistors

Work function effect of metal electrodes on the performance of amorphous Si–Zn–Sn–O thin-film transistors investigated by transmission line method

Influence of Source and Drain Contacts on the Properties of Indium-Gallium Zinc-Oxide Thin-Film Transistors Based on Amorphous Carbon Nanofilm As Barrier Layer

Impact of electrode materials on the performance of amorphous IGZO thin-film transistors

Tailoring Subthreshold Swing in A‐IGZO Thin‐Film Transistors for Amoled Displays: Impact of Conversion Mechanism on Peald Deposition Sequences

Impact of cation compositions on the performance of thin-film transistors with amorphous indium gallium zinc oxide grown through atomic layer deposition

Effect of Source/drain Preparation on the Performance of Oxide Thin-Film Transistors

Tri‐Layer Heterostructure Channel of a‐IGZO/a‐ITZO/a‐IGZO Toward Enhancement of Transport and Reliability in Amorphous Oxide Semiconductor Thin Film Transistors

Performance and Stability of Amorphous Ingazno Thin Film Transistors with A Designed Device Structure

The Effect Of Device Electrode Geometry On Performance After Hot-Carrier Stress In Amorphous In-Ga-Zn-O Thin Film Transistors With Different Via-Contact Structures

Effect of Channel Shape on Performance of Printed Indium Gallium Zinc Oxide Thin-Film Transistors

Effects of Source/Drain Electrodes on the Performance of InSnO Thin-Film Transistors

P‐1.11: Performance Improvement of a‐IGZO Thin‐Film Transistor By Using Ta 2 O 5 /SiO 2 Double‐layer Gate Dielectric

Junctionless Structure Indium-Tin Oxide Thin-Film Transistors Enabling Enhanced Mechanical and Contact Stability

Effect of Post Treatment For Cu-Cr Source/Drain Electrodes on a-IGZO TFTs

Thin Film Transistor Using Amorphous InGaZnO Films as Both Channel and Source/Drain Electrodes

Double Gated a-InGaZnO TFT Properties Based on Quantitative Defect Analysis and Computational Modeling

Fabrication and Properties of InGaZnO Thin-Film Transistors Based on a Sol–Gel Method with Different Electrode Patterns