Abstract:To develop high-strength Al alloys for selective laser melting (SLM) additive manufacturing, we designed a series of Al-Mg(-Si)-Sc-Zr alloys and additively manufactured them using atomized alloy powders. In the absence of Si, the developed Al-xMg-0.2Sc-0.1Zr (x=1.5, 3.0 and 6.0 wt.%) alloys are all susceptible to hot cracking and the average crack density increases with increasing Mg content. The addition of 1.3 wt. % Si into the Al-6Mg-0.2Sc-0.1Zr alloys effectively inhibits hot cracking during SLM and simultaneously refines the microstructure, and thus leading to enhanced mechanical properties in the as-printed samples. By further fine-tuning the alloy compositions, we designed a new alloy Al-8.0Mg-1.3Si-0.5Mn-0.5Sc-0.3Zr. This new alloy demonstrates significantly refined microstructure consisting of submicron cells with coherent Al3(Sc,Zr) nano-particle (2-15 nm) residing in the cell and intergranular Al-Mg2Si eutectic (Mg2Si diameter 10-100 nm). High-density stacking faults and a unique 9R phase are formed in the as-printed sample. The tensile strength and elongation of the as-printed sample are up to 497 MPa and 11%, respectively. After the aging treatment, the tensile strength reaches 550 MPa, while the ductility ranges from 8% to 17%, depending on the aging conditions. In addition to solid solution strengthening, grain boundary strengthening and nanoparticle strengthening, the high-density stacking faults also contributes to strengthening.

On the Guinier-Preston zones in selective laser melted AlSi10Mg alloy

Microstructural evolution and strengthening mechanism of high-strength AlSi8.1 Mg1.4 alloy produced by selective laser melting

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Tensile property and microstructure of Al−4.77Mn−1.37Mg−0.67Sc−0.25Zr alloy under different selective laser melting processing parameters

Selective Laser Melting of Al-Cu-Mn-Mg Alloys: Processing and Mechanical Properties

Selective laser melting of Al-3.48Cu-2.03Si-0.48Sc-0.28Zr alloy: Microstructure evolution, properties and metallurgical defects

Revisiting the precipitation mechanisms of Guinier-Preston zones, η′, and η precipitates in Al-Zn-Mg alloys

A high-strength AlSiMg1.4 alloy fabricated by selective laser melting

Microstructure and mechanical properties of high strength Mg−15Gd−1Zn−0.4Zr alloy additive-manufactured by selective laser melting process

Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms

Effect of the Boundary Orientation of Melt Pool on Mechanical Property and Fracture Path in Selective-Laser-Melted AlSi10Mg Alloy

Mechanical properties and energy absorption of AlSi10Mg Gyroid lattice structures fabricated by selective laser melting

Deformation effect of melt pool boundaries on the mechanical property anisotropy in the SLM AlSi10Mg

Study on microstructure and properties of selective laser melting formed AlSi10Mg alloy

Achieving high strength in selective laser melting AlSi10Mg alloy by adding microsized pure Cu particles

Microstructure and Mechanical Properties of an Er-Modified Al–Mg–Mn–Sc–Zr Alloy Processed by Selective Laser Melting

Experimental examination of strain field within GP zone in an Al–Zn–Mg–Cu alloy

Selective Laser Melted High Mg‐Content Al–Si–Mg–Zr Aluminum Alloy with the Formation of Stacking Faults

Microstructures and tensile properties of a selective laser melted Al–Zn–Mg–Cu (Al7075) alloy by Si and Zr microalloying

High strength Al−Mg−Sc−Zr alloy with heterogeneous grain structure and intragranular precipitation produced by laser powder bed fusion

Microstructures and mechanical properties of Si and Zr modified Al–Zn–Mg–Cu alloy-A comparison between selective laser melting and spark plasma sintering