Abstract:As surface wear is one of the major failure mechanisms in many applications that include polymer gears, lifetime prediction of polymer gears often requires time-consuming and expensive experimental testing. This study introduces a contact mechanics model for the surface wear prediction of polymer gears. The developed model, which is based on an iterative numerical procedure, employs a boundary element method (BEM) in conjunction with Archard's wear equation to predict wear depth on contacting tooth surfaces. The wear coefficients, necessary for the model development, have been determined experimentally for Polyoxymethylene (POM) and Polyvinylidene fluoride (PVDF) polymer gear samples by employing an abrasive wear model by the VDI 2736 guidelines for polymer gear design. To fully describe the complex changes in contact topography as the gears wear, the prediction model employs Winkler's surface formulation used for the computation of the contact pressure distribution and Weber's model for the computation of wear-induced changes in stiffness components as well as the alterations in the load-sharing factors with corresponding effects on the normal load distribution. The developed contact mechanics model has been validated through experimental testing of steel/polymer engagements after an arbitrary number of load cycles. Based on the comparison of the simulated and experimental results, it can be concluded that the developed model can be used to predict the surface wear of polymer gears, therefore reducing the need to perform experimental testing. One of the major benefits of the developed model is the possibility of assessing and visualizing the numerous contact parameters that simultaneously affect the wear behavior, which can be used to determine the wear patterns of contacting tooth surfaces after a certain number of load cycles, i.e., different lifetime stages of polymer gears.

Wear Failures of Plastics

Characteristics and mechanism of abrasive wear for thermoplastic polymers

An investigation of the wear of polymeric materials

The Mechanism of Tribological Wear of Thermoplastic Materials

An Analytical Model of Mechanistic Wear of Polymers

Thermal and Mechanical Mechanisms of Polymer Wear at the Nanoscale

Friction and Wear of Polymer and Polymer Composites

Wear mechanisms in polymer matrix composites abraded by bulk solids

Abrasive wear of graphite fiber-reinforced polymer composite materials

Characterization and Failure Analysis of Plastics

An investigation on the thermal and wear behavior of polymer based spur gears

Studying the Performance of Reinforced Polymer Gear Wheels: Development of an Advanced Test Bench for Wear Analysis

Abrasive wear of some commercial polymers

Evaluation of polymer composites for sliding and abrasive wear applications

Abrasive wear behaviour of polymeric materials

Mechanical and Tribological Performances of Thermoplastic Polymers Reinforced with Glass Fibres at Variable Fibre Volume Fractions

Characteristics of impact friction and wear of polymeric materials

Friction and wear behavior of polyetherimide composites in various wear modes

Tribological Analysis of Engineering Plastics/Steel Friction Pairs

AN REVIEW ON FRICTION BEHAVIOR OF PLASTIC MATERIALS

A Contact Mechanics Model for Surface Wear Prediction of Parallel-Axis Polymer Gears