Abstract:Short-carbon-fiber-reinforced polyetherimide (SCF/PEI) composites have good mechanical properties and are expected to have wide applications including components serving under water lubrication conditions. However, no work has been reported on the tribological behaviors of SCF/PEI composites under water lubrication conditions. This work attempts to explore the practicality of the SCF/PEI composite from a tribological point of view under water lubrication conditions. SCFs are coated by polydopamine (PDA) to enhance the interfacial interaction between fibers and matrix. The tribological performances of SCF/PEI composite are systematically investigated by sliding wear tests under tap and sea water lubrication conditions. Experimental results show that the SCF/PEI composite has a better friction performance in water lubrications than that under dry sliding because of the separation effects formed by a water molecule film and a transfer film. However, no remarkable differences of wear resistance are found between water lubrication and dry contact conditions, and the magnitude of specific wear rate under these conditions is around 1×10-6 mm3/N·m. It is found that contact surface hardness of the SCF/PEI composite is reduced after a sliding test in water due to the plasticization phenomenon, especially sea water can accelerate the diffusion of water molecules into matrix, making the specific wear rate in sea water is ten times of that in tap water for highly-loaded conditions. Meanwhile, the abrasive wear is observed to be the dominated wear mode in boundary lubrication regime, and the adhesion wear occurs around the transition position from the boundary to mixed lubrication regime. It is also found that pressure has a significant effect on the temperature rise within the contact surface than the speed does. Finally, the tribological performance of the SCF/PEI composite under water is exhibited to be better than that of most of polymers and composites reported previously.

Friction and wear behavior of polyetherimide composites in various wear modes

Evaluation of Engineering Polymeric Composites for Abrasive Wear Performance

Investigation of Tribological Properties of PI/FEP Laminated Composites Under Dry Sliding, Water- and Oil-Lubricated Conditions

Frictional and wear behaviors of short carbon fiber reinforced polyetherimide composites in an oil lubricant environment

Sliding Wear of Polyetherimide Matrix Composites

Experimental and numerical investigations of wear behaviors of short-carbon-fiber reinforced polyetherimide composite

Friction And Wear Behavior Of Polyetherimide(Pei) Filled With Polytetrafluoroethylene(Ptfe)

Role of Orientation of Graphite Fabric in Polyetherimide Composite with Respect to Loading Direction on the Wear Performance in Various Wear Modes

Study on Friction and Wear Behavior of Polyetherimide Filled with Graphite

Ultralow Friction and Wear of Polymer Composites under Extreme Unlubricated Sliding Conditions

Investigation of the Friction and Wear Properties of Modified PA66 Composites

Tribological Behaviour of Short Carbon Fiber Reinforced Polyethersulfone Composites with PTW Filler

Tribological behavior of short carbon fiber reinforced polyetherimide composite under water lubrication conditions

Abrasive wear of graphite fiber-reinforced polymer composite materials

Wear and Frictional Performance of Epoxy Composites Reinforced with Natural Waste Fibers and Fillers for Engineering Applications

Surface topography modification, Film transfer and Wear mechanism for fibre reinforced polymer composites—An Overview

Wear failure mechanism analysis of self-lubricating fabric composites at high temperature

Friction and wear performance of polyether ether ketone (PEEK) polymers in three lubrication regimes

Abrasive wear behaviour of polymeric materials

Tribological performances of polymeric plain bearings made of epoxy matrix with UHMWPE, MoS2, Kevlar and base oil as the fillers

Influence of fillers and fibre reinforcement on abrasive wear resistance of some polymeric composites