Abstract:With the escalating industry-wide requirement and based on the inherent properties, recently the polymeric composite is in more demand for tribo-application. Again, the development of eco-friendly material by inclusion of materials derived from natural resources is also becoming one of the promising areas of the interest. In this current study, an agricultural residue like pistachio shell particulates (PSP) is used as bio-filler to develop polymer matrix composites for tribo-application. The polyester matrix test specimens are fabricated with variation of PSP filler concentration ranging from 0 to 7 wt% by the hand lay-up method. The influence of filler content on both mechanical and sliding wear performances of the composites is studied. As per ASTM standard, several tests like tensile, flexural, impact and micro-hardness test have been carried out. To observe abrasive wear response of the developed composite, the dry sliding wear test has been conducted on a pin-on-disc wear tester in accordance with ASTM standard under five different normal loads, sliding distances and three distinct sliding velocities. The findings revealed that the mechanical performances of the composites are enhanced with the increase in the PSP filler concentration. Optimum properties such as hardness of 13 HV, tensile strength of 36.55 MPa, flexural strength of 43.66 MPa and impact strength of 16.36 kJ/m 2 are obtained at 5 wt% reinforcement of PSP filler. Again, an improvement in sliding wear resistance by 39.57% is also noticed. During the examination of worn surface by scanning electron microscope (SEM), the appearance of cracks and the creation of grooves at the lower filler loading and formation of wear debris are noticed at the higher filler loading.

Evaluation of Engineering Polymeric Composites for Abrasive Wear Performance

Friction and wear behavior of polyetherimide composites in various wear modes

Influence of fillers and fibre reinforcement on abrasive wear resistance of some polymeric composites

Abrasive wear of graphite fiber-reinforced polymer composite materials

Role of Orientation of Graphite Fabric in Polyetherimide Composite with Respect to Loading Direction on the Wear Performance in Various Wear Modes

Sliding Wear of Polyetherimide Matrix Composites

A review on mechanical and wear properties of fiber-reinforced thermoset composites with ceramic and lubricating fillers

Mechanical, morphological and wear resistance of natural fiber / glass fiber-based polymer composites

Mechanical and Wear Properties of Polyetheretherketone Composites Filled with Basalt Fibres

Mechanical and Tribological Performances of Thermoplastic Polymers Reinforced with Glass Fibres at Variable Fibre Volume Fractions

Experimental and numerical investigations of wear behaviors of short-carbon-fiber reinforced polyetherimide composite

Wear and Frictional Performance of Epoxy Composites Reinforced with Natural Waste Fibers and Fillers for Engineering Applications

Study on Friction and Wear Behavior of Polyetherimide Filled with Graphite

Evaluation of polymer composites for sliding and abrasive wear applications

Wear mechanisms in polymer matrix composites abraded by bulk solids

Tribological Properties of Self-Reinforced Ultra-High Molecular Weight Polyethylene Composites

Abrasive wear behaviour of polymeric materials

Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material

Abrasive wear behaviour of orange peel (biowaste) particulate reinforced polymer composites

Surface topography modification, Film transfer and Wear mechanism for fibre reinforced polymer composites—An Overview

Tribological Characteristics of Fibrous Polyphthalamide-Based Composites