Abstract:Abstract The goal of the presented research was syntheses of the ultrafine and nanopowder blends by Mechanical Alloying from Fe-W-Al-Ti-Ni-B-C compositions for further application as a precursor for fabrication bulk High-Entropy Alloy (HEA) by explosive compaction technology. The presented paper describes the preliminary investigations of mechanical alloying of Fe-W-Al-Ti-Ni-B-C powders. Laboratory vibrating sieve equipment was used for sorting the initial powders for the reduction of particle size. For the experiments were used powders of Fe-W-Al-Ti-Ni-B-C system consisting of five major metallic and two minor non-metallic B and C elements were used for mechanical alloying. The crystalline coarse Aluminum, Titanium, Carbon and Nickel, fine-grained iron and tungsten and amorphous Boron powders were used as initial components. The Fe, W, Al, Ti and Ni powders were preliminary checked by “Explorer 5000 XRF” by Skyray instrument and verified. Based on the literature review, theoretical investigation and phase diagrams for mechanical alloying were selected two compositions with the following molar ratio: Fe 20 W 15 Al 15 Ti 20 Ni 20 B 5 C 5 ; Fe 25 W 25 Al 10 Ti 15 Ni 15 B 5 C 5 ; The mechanical alloying was realized on the high energy ball mill with zirconium oxide jars and balls. The ball to powder mass ratio was 10:1, the rotation speed was 500rpm. The process was carried out in dry conditions. The time of mechanical alloying was 5h, 10h and 14 h. The powders were prepared for preliminary analyses and assessment of particle size. The SEM and optical microscopy results of mechanical alloying are presented in the paper.

Reactive synthesis and phase evolution of W 2 FeB 2 alloy powders

The preparation process of ultrafine gain W-Re powder by wet chemical method and its effect on alloy properties

Morphology and microstructure of Fe–Cr–W–B alloy powders prepared by argon gas atomization

A novel dissolution-precipitation mechanism during liquid phase sintering and its strengthening effects in W-Ni-Fe alloys with low W contents

Excellent performance of W–Y2O3 composite via powder process improvement and Y2O3 refinement

A new design strategy for purifying and strengthening W alloy by self-decomposing in-situ nanoparticles

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Synthesis of Ultrafine Fe-W-Al-Ti-Ni-C-B Powders by Mechanical Alloying

Resolving the Sintering Conundrum of High-Rhenium Tungsten Alloys

Achieving porous tungsten with high porosity by selective dissolution of W-Fe alloy

Chemical Preparation and Investigation of Fe-P-B Ultrafine Amorphous Alloy Particles

Novel synthesis of CuW composite reinforced with lamellar precipitates via aluminothermic reduction

B2 precipitates and distribution of W in a Ti–47Al–2W–0.5Si alloy

Reconstruction Of The Wet Chemical Synthesis Process: The Case Of Fe5c2 Nanoparticles

Powder-Route Synthesis and Mechanical Testing of Ultrafine Grain Tungsten Alloys

Characterization of W-Er2O3 alloy prepared by co-deposition method and spark plasma sintering

Interface alloying design to improve the stability and cohesion of W/HfC interface by first-principles study

Study on the RF Inductively Coupled Plasma Spheroidization of Refractory W and W-Ta Alloy Powders

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Properties of Ultrafine Amorphous Fe-Ni-B Powder Produced by Chemical-Reduction

Comparative study of the microstructure and phase evolution of FeCoCrNiAl high-entropy alloy-matrix WC nanocomposite powders prepared by mechanical alloying