Abstract:Nuclear fusion can generate electricity by using enormous energy released by hydrogen isotopes,deuterium and tritium fusion reactions.Nuclear fusion energy is not only the Chinese dream but also is the dream of mankind.And one of the key problems is the development of plasma facing materials(PFMs).Because the plasma facing components (PFCs) face extreme conditions,such as high levels of neutron irradiation,a high heat flux of energetic particles,sputtering erosion,and transient events like plasma disruptions,the comprehensive servicing performance of PFMs is closely related to the safety operation of fusion devices.The serving condition of PFMs in CFTER is much more harsh than that in current fusion device,so it is a big challenge for future PFMs.Tungsten is selected as the prime candidate for PFCs due to its melting temperature,high thermal conductivity,high neutron load capacity,low tritium retention and low sputtering yield.However,pure W exhibits serious embrittlement in several regimes,i.e.,low-temperature embrittlement (relatively high ductile-brittle transition temperature DBTT),recrystallization embrittlement and radiation embrittlement,as well as the surface crack and melting under high thermal load,which will be not suitable for the future advanced fusion devices.Therefore,it is very important to reveal the irradiation damage mechanism,hydrogen/helium effect and boundary strengthening by simulation,as well as to develop new W based PFMs.Focusing on the above issues,in recent decades,many efforts have been devoted to improving the strength and ductility of W alloys by developing new W alloys such as oxide dispersion strengthening and carbide dispersion strengthening W alloy,whose some properties were improved compared with pure W.In which,bulk W-0.5wt％ ZrC alloy developed by Institute of Solid State Physics,Chinese Academy of Sciences,has better performance,which is a very promising candidate PFCs for the future fusion devices.Therefore,this paper reviews the R&D experience,including simulation for designing,microstructure and servicing performance of W-0.5wt％ ZrC alloy.The further research direction of this material as well as the strategies for R&D of other PFCs with high performance are proposed by comprehensive analysis and summary.

Interface alloying design to improve the stability and cohesion of W/HfC interface by first-principles study

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

An Alloying Element Screening Method to Design Zr2Co Based Alloys with Superior Disproportionation Resistance

Mechanical Properties and Thermal Stability of W-ZrC/HfC-Re Alloys Fabricated by Spark Plasma Sintering

Interface Alloying Design to Improve the Dispersion of TiB<sub>2</sub> Nanoparticles in Al Composites: A First-Principles Study

First-Principles Calculation on the Influence of Alloying Elements on Interfacial Features of W-Cu System

Effect of hydrogen-helium interaction on their segregation and desorption at the W/HfC interfaces by first-principles calculations

Interfacial structure of WC-Fe metal-matrix composite (WC/Fe3W3C and Fe/Fe3W3C) stability, electronic and mechanical properties from first-principles calculations

Bonding Tungsten, W–Cu-alloy and Copper with Amorphous Fe–W Alloy Transition

Insight into interface cohesion and impurity-induced embrittlement in carbide dispersion strengthen tungsten from first principles

Effect of HfC addition on the microstructure and properties of W–4.9Ni–2.1Fe heavy alloys

Synthesis and characterization of high-entropy carbide dispersed strengthening tungsten: Mechanical and thermal properties analysis

Effect of alloying elements on interfacial properties and mechanical behavior of Mg/WC systems: A first-principles study

Construction of a new n -body potential and multi-scale investigations of the direct alloying behaviors for immiscible W/Cu system

First Principles Study of the Interfaces Between Tungsten and Transition Metal Carbides: Structures, Energetic and Light Elements Trapping

First-principles study of effects of alloying elements on Cu/γ-Fe interfacial properties

First-principles Calculations on Interface Stability and Migration of H and He in W-ZrC Interfaces

The Strengthening Effects and Mechanisms of Alloying Elements on Interfaces for Multiphase Ni-based Superalloys: A First-Principles Study

The Progress and Outlook of W-ZrC Alloy as Plasma Facing Component

Investigation on the effect of alloying elements on the Ti 2 AlC/TiAl interfacial properties: First-principles prediction and experimental verification

Improving the Interface Strength and Fatigue Property of W-Cu-steel Brazed Joint Via Induced Interface Alloying