Abstract:In this paper, the influences of Cr3C2/VC content on WC grain size, WC grain shape and mechanical properties of WC–6 wt. % Co cemented carbides were investigated. The results showed that the grain size first rapidly decreased and then slightly decreased with the increasing Cr3C2/VC content, and VC led to finer grain size and narrower size distribution. HRTEM/EDS analysis of the WC/Co interface indicates that the segregation concentration of V is much larger than that of Cr, which may be a strong response to the higher inhibition efficiency of VC. The addition of Cr3C2 induced triangular prism shape WC grains while VC generated stepped triangular prism grains. Despite the grain growth inhibitor (GGI) mechanisms of Cr3C2/VC have been extensively studied in the literature, the doping amount, especially the doping limit, has not been systematically investigated. In this work, the saturated solubilities of Cr and V in cobalt binder phase along with carbon content hare been predicted based on thermodynamic calculations. Based on the theoretical calculations, the doping amount of Cr3C2/VC is designed to be gradually increasing until more or less over their maximum solubilities in the binder phase, thereby investigating the subsequent microstructure and mechanical properties. When the doping of Cr3C2/VC exceeds the maximum solubility in Co phase, Co-rich Cr-carbides and Co-deficient V-carbides would form respectively, which were detrimental to the transverse rupture strength (TRS) and impact toughness. The hardness increased with the increasing Cr3C2/VC content, while the fracture toughness decreased with the increasing Cr3C2/VC content. The TRS initially enhanced and then declined, but the stepped triangular prism shape grains and low fraction of WC/Co interface in WC–6Co–VC cemented carbide led to a more pronounced decline in the TRS. The sample with 0.6 wt. % Cr3C2 addition had good comprehensive mechanical properties, its hardness, fracture toughness and TRS were 1880 kg/mm2, 9.32 MPa·m1/2 and 3450 MPa, respectively.

First principles calculation of interfacial stability, electronic and mechanical properties of WC-304 cemented carbides

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Interfacial structure of WC-Fe metal-matrix composite (WC/Fe3W3C and Fe/Fe3W3C) stability, electronic and mechanical properties from first-principles calculations

Adhesion, bonding and tensile properties of Ti doped WC (001)/diamond (111) interface: A first-principles calculation

Thermodynamic analysis of the interface reaction and thermal stress of WCp/Fe composites

Effect of rare-earth elements on the interface of WC/α-Fe cemented carbide: A first-principles calculation

First-principles simulations of metal-ceramic interface adhesion: Co/WC versus Co/TiC

Investigation on the WC/Cu interfacial bonding properties: First-principles prediction and experimental verification

First-principles calculation on β-SiC(111)/α-WC(0001) interface

Insight into interface cohesion and impurity-induced embrittlement in carbide dispersion strengthen tungsten from first principles

First-Principles Calculate the Stability, Mechanical Properties and Electronic Structure of Carbide MC, M2C and M6C in M50NiL Steel

Comparative research on the interfacial properties of Ni/diamond and Ni/graphene interface with Cr, B, and Si additions by first-principles calculation

Interface Calculation of In Situ Micro-Nano TaC/NbC Ceramic Particle Composites

Interface microstructure and abrasive wear properties of WC-iron matrix composites with Ni, Mo, Fe added to the preforms

Interface alloying design to improve the stability and cohesion of W/HfC interface by first-principles study

Influence of Cr3C2 and VC Content on WC Grain Size, WC Shape and Mechanical Properties of WC–6.0 wt. % Co Cemented Carbides

The first-principles and ab initio molecular dynamics simulations revealing the interface energy of the NbC/α-Fe

First-principles study on the interfacial electronic structure and analysis of the bonding properties of NbC/Fe composites

Effect of alloying elements on interfacial properties and mechanical behavior of Mg/WC systems: A first-principles study

Effect of Cr atom doping on the carbide stability and mechanical properties of high carbon chromium bearing steels

(W 1‐x ,M x )C carbides with desired combinations of compatible density and properties – A first‐principles study