Abstract:WC/Fe matrix composites with mass fractions of 30–50 wt% were prepared by gravity casting and infiltration, and the phase composition, microstructure, friction and wear properties of the composites were studied. In addition, the mechanism of the effect of the change of WC mass fraction on the structural evolution and wear properties of the composites was particularly investigated. The results show that the composites are mainly composed of WC, α-Fe, W 2 C, Fe 6 W 6 C, and M 7 C 3 phases. With the increase of WC mass fraction, the microstructure of the composite shows different results, WC particles start to dissolve under the action of high temperature melt, W elements solidly dissolve into the matrix and precipitate into fishbone structure carbide. As the content of WC particles in the prefabricated body increases, the C atoms around the WC particles react with the dissolved W atoms, and due to the cooling of the metal liquid, the energy transferred between the WC and the metal liquid does not make it melt completely before solidification occurs, and the metallurgical reaction between the WC particles and the substrate occurs and produces a dense interface. The WC/Fe matrix composites showed a trend of increasing and then decreasing with the increase of WC content and friction coefficients of 0.36, 0.52, and 0.26. The wear rates were 1.52(mm 3 /N-m) × 10 −5 , 1.24(mm 3 /N-m) × 10 −5 , and 1.57(mm 3 /N-m) × 10 −5 , which showed the opposite trend with the friction coefficients, and the wear rates were compared with the morphology. When the composite was added with 40% WC, the wear rate increased by 27% compared with other parameters. It shows that it has good wear resistance.

Thermodynamic analysis of the interface reaction and thermal stress of WCp/Fe composites

Interfacial structure of WC-Fe metal-matrix composite (WC/Fe3W3C and Fe/Fe3W3C) stability, electronic and mechanical properties from first-principles calculations

Theoretical calculations on the adhesion, stability, electronic structure, and bonding of Fe/WC interface

First principles calculation of interfacial stability, electronic and mechanical properties of WC-304 cemented carbides

Interface microstructure and abrasive wear properties of WC-iron matrix composites with Ni, Mo, Fe added to the preforms

Interfacial Characteristics of WC Particles Reinforced Hadfield Steel Matrix Composites

Strengthening Mechanisms and Research Progress in the W/Cu Interfaces

Preparation of WC + Η Co-Reinforced Iron Matrix Composites by Plasma Remelting and Modulation of Η Phase

Fe–W–C Thermodynamics and in Situ Preparation of Tungsten Carbide-Reinforced Iron-Based Surface Composites by Solid-Phase Diffusion

Effect of interface structure on thermal conductivity and stability of diamond/aluminum composites

Effect of Particle Size on Microstructure and Element Diffusion at the Interface of Tungsten Carbide/High Strength Steel Composites

Effect of WC mass fraction on the microstructure and frictional wear properties of WC/Fe matrix composites

First-principles study on stability, adhesion and fracture properties of ZrO2/W interface in composite materials

Interface alloying design to improve the stability and cohesion of W/HfC interface by first-principles study

Analysis of interface microstructure and element diffusion of WC-Co-Ni-Fe powder and M2 high-speed steel composite

Microstructural evolution and performance analysis of WC-11Co reinforced iron matrix composites

Evaluation of Interfacial Stability and Strength of Cermets Based on Work Function

A novel approach to fabricate WC reinforced W Cu composites via MSC and infiltration method

Interfacial Microstructure and Mechanical Property of the Discontinuous Short Tungsten Fiber-Reinforced Tungsten Matrix Composites

Fabrication and interface property of WC-TiC-Co/Cr20 composites

Microstructure and Failure Mechanism of Y2O3 Coating on the W Fiber in Wf/W Composites During Field Assisted Sintering