Abstract:Multi-walled carbon nanotubes (MWCNTs) are one of the ideal reinforcements for metal matrix composites (MMCs), however, it faced a big challenge regarding their mechanical compatibility of MWCNTs reinforced titanium matrix composites (TMCs) due to its strong agglomeration, undesirable interfacial reaction and etc. To overcome this key problem, we employed Cu nanoparticles to decorate MWCNTs (Cu-MWCNTs) and successfully fabricated Cu-MWCNTs reinforced TMCs with the support of hot-pressed sintering (HPS) approach. The addition of Cu nanoparticles not only improved its dispersion, but also effectively reduced the interfacial reaction through the in-situ synthesized interfacial Ti2Cu phases and preserving the integrity of MWCNTs. Tensile studies reflected that the addition of 0.5 wt % Cu-MWCNTs was advantageous in improving the tensile properties, breaking through the trade-off between the strength and ductility, which were 15% and 45% higher than the matrix alloy, respectively. The quantitatively analysis of the increased strength proved that the primary strengthening mechanisms included the grain refinement, the solid solution of the carbon atoms from MWCNTs and the efficient load transfer from the multiple interfaces with in-situ synthesized interfacial Ti2Cu phases. The improvement in toughness was mainly derived from the high dislocation storage capacity induced by interfacial modification, thus achieving the higher uniform elongation in TMCs. Consequently, this work provided the promising approach to design strong and ductile TMCs.

A novel nano interface for particulate‐reinforced titanium matrix composites

Particle Distribution and Interfacial Reaction of WC Reinforced Titanium Matrix Composites Fabricated by Wire and Arc Additive Manufacturing

Interfacial modification strategy to break through the strength and ductility trade-off in multi-walled carbon nanotubes reinforced titanium matrix composites

Stable nanoparticles dispersion induced an unprecedented high strength in a bulk W-TiC alloy

Interfacial/intragranular reinforcement of titanium-matrix composites produced by a novel process involving core-shell structured powder

Interface Evolution and Mechanical Properties of Nickel Coated Graphene Nanoflakes/pure Titanium Matrix Composites

Effect of WC addition on microstructure and properties of laser melting deposited Ti6Al4V

Novel titanium matrix composites reinforced by NiCoCr medium entropy particles

Strengthening Effects of Tic Particles and Microstructure Refinement in in Situ Tic-Reinforced Ti Matrix Composites

Microstructure and Mechanical Properties of Nanocrystalline Wc-Particle-Reinforced Ti-Based Composites with Nano/Ultrafine-Grained Intermetallic Matrix from Spark Plasma Sintering and Crystallization of Amorphous Phase

Reaction-induced nano-sized TiC in additive manufactured Ni-Co based superalloy

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites

Fabrication and interface property of WC-TiC-Co/Cr20 composites

Interfacial Characteristics of WC Particles Reinforced Hadfield Steel Matrix Composites

Microstructure and Mechanical Properties of Intragranular W-Cu/TiC-ZrC Composite Prepared by Reactive Melt Infiltration at 1300 °C

Interfacial bonding and wear behavior of macroscopic TiC particulates reinforced iron-based composites fabricated by infiltration casting process

Enhancing the Properties of Metal-Composite Interface by a Nano-Tio2 Coating

Improvement on Mechanical Property of B4C/Al Composites by Addition of Ti Through Interfacial Reaction

Boron nitride nanosheets as precursors for 3D nano-configurations in titanium matrix composites: interfacial evolution and mechanical behavior

Agglomeration-free nanoscale TiC reinforced titanium matrix composites achieved by in-situ laser additive manufacturing

Preparation of Nanometer Size TiC Particulate Reinforcements in Ti Matrix Composites under High Pressure