Abstract:Recent research has focused on laser in-situ additive manufacturing of metal matrix composites with spatially controllable microstructures (phases). This study, inspired by the process of inserting mesh fibers into reinforced concrete, synthesizes TiN in situ using laser powder bed fusion and N 2 gas. The laser-melted track, embedded with TiN particles, formed a spatially heterostructured Ti composite (SHTC) with a three-dimensional, artificially controlled architecture in a pure Ti matrix. The influences of process parameters on the mechanical properties of the spatially heterostructured Ti composite and the microstructural evolution of TiN/Ti were investigated emphatically. The results showed that the growth direction of the microstructure was changed by laser powder bed fusion additive manufacturing with alternating N 2 –Ar gas under suitable N 2 concentration and melting track spacing. Among all spatially heterostructured Ti composites, the TiN–Ti heterolayer net-like structure achieved a high ultimate tensile strength of ∼1.0 GPa and elongation of 27 %, demonstrating a superior strength-ductility combination than intrinsic pure Ti and uniform TiN composites, as well as traditional layered structure Ti-based composites. During the tensile test, the deformation behavior was monitored in situ using digital image correlation, and the fracture mechanism was investigated. Hetero-deformation induced strengthening and toughening potentially explains the mechanism behind the strength enhancement of spatially heterostructured Ti composites. Furthermore, this work may stimulate research and development in additive manufacturing of spatial heterostructures with configurable structures, targeting synergistic regulation of strength and ductility in the integration of structure-material-function.

Agglomeration-free nanoscale TiC reinforced titanium matrix composites achieved by in-situ laser additive manufacturing

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

TiC/Ti6Al4V functionally graded composite fabricated by in-situ laser additive manufacturing via gas–liquid reaction

Microstructure and mechanical properties of in-situ TiC hybrid reinforced TC4 matrix composites by a new additive manufacturing method

Additive manufacturing of micro/nano multiphase synergistically reinforced Ti-55Al-7.5Nb with a reticular boundary precipitate via direct laser deposition

In Situ Synthesized TiC/Mo-based Composites Via Laser Powder Bed Fusion

In-situ laser additive manufacturing of Ti6Al4V matrix composites by gas–liquid reaction in dilute nitrogen gas atmospheres

Influence of in situ ceramic reinforcement towards tailoring titanium matrix composites using laser-based additive manufacturing

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders

In-situ synthesis of spatial heterostructure Ti composites by laser powder bed fusion to overcome the strength and plasticity trade-off

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites

Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting

Enhanced Strength and Ductility of Metal Composites with Intragranularly Dispersed Reinforcements by Additive Manufacturing

In-situ synthesis of Ti<sub>5</sub>Si<sub>3</sub>-reinforced titanium matrix nanocomposite by selective laser melting: Quasi-continuous reinforcement network and enhanced mechanical performance

Interfacial/intragranular reinforcement of titanium-matrix composites produced by a novel process involving core-shell structured powder

Additive Manufacturing of (tib+tic)/ti6al4v Composites with Tailored Network Reinforcement Architecture

Direct laser fabricated in situ TiC particulate reinforced Ni30Al20Fe intermetallic matrix composite

Direct Laser Powder-Bed Fusion Additive Manufacturing of Complex-Shaped TiB2-B4C Composite with Ultra-Fine Eutectic Microstructure and Outstanding Mechanical Performances

Achieving Simultaneously Improved Tensile Strength and Ductility of a Nano-Tib2/alsi10mg Composite Produced by Cold Spray Additive Manufacturing

Reaction-induced nano-sized TiC in additive manufactured Ni-Co based superalloy

In-situ synthesis of high strength and toughness TiN/Ti6Al4V sandwich composites by laser powder bed fusion under a nitrogen-containing atmosphere