Abstract:NiAl intermetallics is considered to be a potential high temperature structural material based on a high melting point, low density, high thermal conductivity, excellent oxidation and hot-corrosion resistance at elevated temperatures [1–4], but its high temperature strength is insufficient for the majority of actual applications. The tensile ductility and fracture toughness at ambient temperatures are often also unsatisfactory [5, 6]. The solid solution strengthening, precipitation strengthening, directional solidification and single crystal technique have been explored to improve its high temperature strength. Although significant progress has been achieved, the ambient tensile ductility and fracture toughness often deteriorate as a result. On the other hand, the ductility and toughness can also be improved by microalloying, macroalloying and plastic secondary phase additions, but this is at the expense of the strength [4–7]. In other words, it is very difficult to compromise its high temperature strength and ambient temperature ductility. This severely restricts its operating temperature and deteriorates its machinability. It is significant to explore novel fabricaturing techniques for NiAl intermetallic alloy to improve its comprehensive mechanical properties. Preparing intermetallic matrix composite is an effective method to produce engineering NiAl intermetallic alloy and to improve its high temperature strength and retain ambient temperature ductility simultaneously [8, 9]. Good ductility can be obtained through adequately alloying the intermetallic matrix while the strength is improved with the reinforcements. The casting, combustion synthesis, powder metallurgy and mechanical alloying are major methods for preparing NiAl intermetallic matrix composites. Nevertheless, in many cases, the mechanical bonding due to no interfacial reaction, or the brittle reactive products existing at the interface between matrix and reinforcement due to excessive interfacial reaction often result in weak interfacial bonding so that whole properties

Direct laser fabricated in situ TiC particulate reinforced Ni30Al20Fe intermetallic matrix composite

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Laser Synthesizing Nial Intermetallic and Tic Reinforced Nial Intermetallic Matrix Composite

Synthesis and fabrication of WC particulate reinforced Ni 3 Al intermetallic matrix composite coating by laser powder deposition

Direct Laser Fabricated in Situ TiC Particulate Reinforced Ni30Al20Fe Intermetallic Matrix Composite

Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting

Microstructure and properties of inter/inner-layer regions of TiCp/Ti6Al4V composites manufactured by laser melting deposition

Laser Metal Deposition of TiC/Inconel 718 Composites with Tailored Interfacial Microstructures

Investigation of Ti2AlNb-Added TiAl Composite Prepared by Direct Laser Deposition

Novel selective laser melting processed in-situ TiC particle-reinforced Ni matrix composite with excellent processability and mechanical properties

Study on microstructure and tribological properties of nano/micron TiC/TC4 composites fabricated by laser melting deposition

Microstructure Characteristics and Properties of In-Situ Formed Tic/Ni Based Alloy Composite Coating by Laser Cladding

Interfacial Microstructures and Mechanical Properties of TiC Reinforced GH 3230 Superalloy Manufactured by Laser Metal Deposition

Microstructure and Phase Evolution of Ti-Al-C-Nb Composites Prepared by In Situ Selective Laser Forming

TiC particulate composite coating produced in situ by laser cladding

Graded microstructure and properties of TiCp/Ti6Al4V composites manufactured by laser melting deposition

Effect of Heat Input on the Microstructure of In-Situ Synthesized TiN–TiB/Ti Based Composite Coating by Laser Cladding

In situ TiC/Ti2Ni reinforced CrTi4-based composites during laser cladding

Microstructure and mechanical properties of in-situ TiC hybrid reinforced TC4 matrix composites by a new additive manufacturing method

In Situ Fabrication of TiC/Ti–Matrix Composites by Laser Directed Energy Deposition