Abstract:Selective laser melting (SLM) is an important additive manufacturing process. It applies focused laser energy to quickly melt and solidify material powders, and a controlled layered operation can result in a free form build that is often out of reach for machining processes. As such, it has attracted much attention in recent years. However, metal components produced by this process often have inferior mechanical properties, as compared with the counterparts by the traditional manufacturing processes. To strengthen the metal components by SLM, adding reinforcement particles and applying post treatment are regarded as the two effective ways. Although adding reinforcement particles to create metal matrix composites has been studied by researchers in literature, much fewer has been done to use post treatment processes to further improve the properties and performance of the metal matrix composites from SLM. In this study, a nano-TiC reinforced Inconel 718 composite is prepared using SLM technique. The material has 0.5 wt.% nano-TiC addition. Solid solution treatments at three levels of temperature (940, 980, 1020 °C) are carried out to evaluate the effect of the heat treatment methods on the microstructure and resulted mechanical properties of the composite material. The results of samples with and without heat treatment are also compared. SEM observations are carried out to analyze the microstructure of the composite and understand the reinforcing mechanism. Tensile tests are conducted to evaluate the mechanical properties of the formed composites. It is discovered that compared with the pure Inconel 718 by SLM, the Inconel 718-TiC composite exhibits improved ultimate tensile strength. Microscopy observation of as-built samples indicates that the dendritic structures of Inconel 718 is remarkably refined by the TiC particles. Suspected laves phase particles are observed in as-built Inconel-TiC composite, and they partially transform to large amount of needle-like δ phase during the solid solution treatment.

Novel selective laser melting processed in-situ TiC particle-reinforced Ni matrix composite with excellent processability and mechanical properties

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

In-situ synthesis of Ti<sub>5</sub>Si<sub>3</sub>-reinforced titanium matrix nanocomposite by selective laser melting: Quasi-continuous reinforcement network and enhanced mechanical performance

Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting

Selective laser melting of TiB2/AlSi10Mg composite: Processability, microstructure and fracture behavior

High strength and ductility of titanium matrix composites by nanoscale design in selective laser melting

Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting

Achieving near equiaxed α-Ti grains and significantly improved plasticity via heat treatment of TiB reinforced titanium matrix composite manufactured by selective laser melting

Mechanical Properties of In-Situ Synthesis of Ti-Ti3Al Metal Composite Prepared by Selective Laser Melting

Direct laser fabricated in situ TiC particulate reinforced Ni30Al20Fe intermetallic matrix composite

Effect of Solid Solution Temperature on Material Properties and Microstructure of Inconel 718/TiC Composites by Selective Laser Melting

Microstructure and mechanical properties of (TiB+TiC)/Ti composites fabricated in situ via selective laser melting of Ti and B4C powders

Interfacial structure and wear properties of selective laser melted Ti/(TiC+TiN) composites with high content of reinforcements

Microstructure, Mechanical Properties and Fracture Behavior of Micron-Sized TiB2/AlZnMgCu(Sc,Zr) Composites Fabricated by Selective Laser Melting

Enhancing mechanical properties of selective-laser-melting TiN/AISI 420 composites through Taguchi GRA and PCA multi-response optimization

Novel titanium matrix composites reinforced by NiCoCr medium entropy particles

Microstructure evolution and strengthening mechanisms of a high-performance TiN-reinforced Al-Mn-Mg-Sc-Zr alloy processed by laser powder bed fusion

Tribological Behavior of TiC Particles Reinforced 316Lss Composite Fabricated Using Selective Laser Melting

Cracking inhibition of nano-TiC reinforced René 104 superalloy fabricated by selective laser melting

In-situ synthesis and superhigh modulus of network structured TiC/Ti composites based on diamond-Ti system

In situ formation of D022-Al3Ti during selective laser melting of nano-TiC/AlSi10Mg alloy prepared by electrostatic self-assembly