Abstract:Recent research has focused on laser in-situ additive manufacturing of metal matrix composites with spatially controllable microstructures (phases). This study, inspired by the process of inserting mesh fibers into reinforced concrete, synthesizes TiN in situ using laser powder bed fusion and N 2 gas. The laser-melted track, embedded with TiN particles, formed a spatially heterostructured Ti composite (SHTC) with a three-dimensional, artificially controlled architecture in a pure Ti matrix. The influences of process parameters on the mechanical properties of the spatially heterostructured Ti composite and the microstructural evolution of TiN/Ti were investigated emphatically. The results showed that the growth direction of the microstructure was changed by laser powder bed fusion additive manufacturing with alternating N 2 –Ar gas under suitable N 2 concentration and melting track spacing. Among all spatially heterostructured Ti composites, the TiN–Ti heterolayer net-like structure achieved a high ultimate tensile strength of ∼1.0 GPa and elongation of 27 %, demonstrating a superior strength-ductility combination than intrinsic pure Ti and uniform TiN composites, as well as traditional layered structure Ti-based composites. During the tensile test, the deformation behavior was monitored in situ using digital image correlation, and the fracture mechanism was investigated. Hetero-deformation induced strengthening and toughening potentially explains the mechanism behind the strength enhancement of spatially heterostructured Ti composites. Furthermore, this work may stimulate research and development in additive manufacturing of spatial heterostructures with configurable structures, targeting synergistic regulation of strength and ductility in the integration of structure-material-function.

In-situ synthesis of spatial heterostructure Ti composites by laser powder bed fusion to overcome the strength and plasticity trade-off

In-situ synthesis of high strength and toughness TiN/Ti6Al4V sandwich composites by laser powder bed fusion under a nitrogen-containing atmosphere

In-situ additive manufacturing of high strength yet ductility titanium composites with gradient layered structure using N2

Fundamental Study of In-Situ Strengthening and Formation of Continuous Gradient Titanium Alloys via Laser Directed Energy Deposition

In-situ Synthesis of High-Performance TiN/TC4 Sandwich Structures Via Nitrogen-Controlled Laser Directed Energy Deposition

Comparative Study about the Properties of in Situ Synthesized TiN/Ti6Al4V Sandwich Structure Materials by Selective Laser Melting and Laser Directed Energy Deposition

Refined Microstructure and Ultrahigh Mechanical Strength of (tin + TiB)/Ti Composites in Situ Synthesized Via Laser Powder Bed Fusion

Highly controllable additive manufacturing of heterostructured nickel-based composites

Agglomeration-free nanoscale TiC reinforced titanium matrix composites achieved by in-situ laser additive manufacturing

Direct Laser Powder-Bed Fusion Additive Manufacturing of Complex-Shaped TiB2-B4C Composite with Ultra-Fine Eutectic Microstructure and Outstanding Mechanical Performances

High strength and ductility of titanium matrix composites by nanoscale design in selective laser melting

Microstructure evolution and strengthening mechanisms of a high-performance TiN-reinforced Al-Mn-Mg-Sc-Zr alloy processed by laser powder bed fusion

Microstructure and Fracture Behavior of TiC Particles Reinforced Inconel 625 Composites Prepared by Laser Additive Manufacturing

Synergistic Strengthening Mechanisms of Dual-Phase (TiN+AlN) Reinforced Aluminum Matrix Composites Prepared by Laser Powder Bed Fusion

Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting

Heterogeneous network structures formed in TiC/TC4/β-Ti composites for enhancing both strength and ductility

Microstructure Evolution and Strengthening Mechanisms of a High-Performance TiN-reinforced Al-Mn-Mg-Sc-Zr Alloy Processed by Laser Powder B E D Fusion

Strength-ductility synergy in 3D-printed (TiB + TiC)/Ti6Al4V composites with unique dual-heterogeneous structure

Heterogeneous Network Structures Formed in TiC/TC4/β-Ti Composites for Enhancing Strength with Good Ductility

In-situ Development of a Sandwich Microstructure with Enhanced Ductility by Laser Reheating of a Laser Melted Titanium Alloy

Selective laser melting processing of heterostructured Ti6Al4V/FeCoNiCrMo alloy with superior strength and ductility