Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

A novel dissolution-precipitation mechanism during liquid phase sintering and its strengthening effects in W-Ni-Fe alloys with low W contents

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

The Bifunctional Low Mismatch Nano Strengthening Phase Leads to a High Strength-Ductility W-Ta-Ni-Fe-Cu Alloy

Tungsten Wires and Porous NiAl Prepared Through Directional Solidification and Selective Dissolution

Fabrication of Ultrafine-Grain and Great-Performance W–Ni–Fe Alloy with Medium W Content

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

In-situ formation of Ni3Ta nanophase for strengthening tungsten alloy

In-situ formation of Ni 3 Ta nanophase for strengthening tungsten alloy

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Fine-grained 93W-4.9Ni-2.1Fe alloy with ultrahigh yield strength prepared via low temperature sintering of W nanocomposite powder

Phase transformation and thermal stability of mechanically alloyed W–Ni–Fe composite materials

Microstructure and properties of liquid-phase sintered tungsten heavy alloys by using ultra-fine tungsten powders

Avoiding microstructural instabilities in high tungsten containing superalloys by adjusting Al content

Tungsten heavy alloy: Nano-crystallinity and alloying induced low temperature sintering, microstructure and mechanical properties

Microstructure and mechanical properties of liquid–phase sintered W@NiFe composite powders

The Study on Low Temperature Sintering of a W–Ni–Cu–Sn Heavy Alloy

Densification and microstructure characteristics of mechanically alloyed W-Ni-Fe composite powders

Origin of Strong Solid Solution Strengthening in the CrCoNi-W Medium Entropy Alloy

New Insights into the Accelerated Sintering of Tungsten with Trace Nickel Addition

The effect of fine W particles in matrix phase on mechanical properties of tungsten heavy alloys

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys