Abstract:CoCrFeNi high entropy alloys (HEAs) are renowned for their exceptional ductility and corrosion resistance, positioning them as promising contenders in corrosion-resistant wear applications. Nonetheless, their intrinsic drawback lies in relatively diminished strength and hardness. This study delves deep into elucidating the mechanisms through which the incorporation of dopant elements augments the strength and toughness of CoCrFeNi HEAs. High-speed laser cladding (HLC) was employed to fabricate CoCrFeNi HEAs coatings, and the influence mechanisms of Ti, Nb, and Zr dopants on coating phase structure, microstructure, elemental distribution, microhardness, tensile properties, tribological performance, and electrochemical corrosion resistance were investigated. The results show that Ti boasts the highest affinity for solubility within the CoCrFeNi matrix, preserving its inherent FCC simple solid solution configuration. In contrast, Nb and Zr exhibit diminished solubility, culminating in the emergence of BCC phases and intermetallic compounds. In terms of strengthening mechanisms, the addition of Ti primarily contributes to solid solution strengthening, enhancing the strength, hardness, and wear resistance of CoCrFeNi HEAs coatings, with minimal impact on their ductility, resulting in coatings with optimal corrosion resistance. The introduction of Nb generates an interdendritic eutectic microstructure and shifts the dominant crystallographic plane from (200) to (111) in the FCC phase, leading to superior strength and wear resistance. The incorporation of Zr results in the formation of numerous Ni 11 Zr 9 intermetallic compounds in the interdendritic regions, significantly deteriorating both ductility and corrosion resistance. This comprehensive investigation furnishes pivotal empirical insights and theoretical frameworks, setting the stage for the judicious optimization of HEAs in advanced material applications.

Simultaneous enhancements of strength and hardness for fine-grained W-NiFeCoCrMn composites

Enhancing the mechanical properties of casting eutectic high-entropy alloys via W addition

Influence of Tungsten Content on Microstructural Evolution of Cobalt-Containing High-Entropy Alloy via Mechanical Alloying

Metastable FeCrMnCo HEAs with the reinforcement of tungsten carbide fabricated by laser melting: Microstructure, mechanical properties and tribological behaviors

Microstructure and properties of WC-Co/CrMnFeCoNi composite cemented carbides

Fine-grained 93W-4.9Ni-2.1Fe alloy with ultrahigh yield strength prepared via low temperature sintering of W nanocomposite powder

Influence of tungsten on microstructure evolution and mechanical properties of selected novel FeCoCrMnWx high entropy alloys

Structure and Mechanical Properties of WC-Based Hardmetal with a High-Entropy NiFeCrWMo Binder

Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Microstructure and mechanical characterizations of liquid phase sintered W-Ni-Cu heavy alloy modified with La 2 O 3 and Fe addition

Comparative study of the microstructure and phase evolution of FeCoCrNiAl high-entropy alloy-matrix WC nanocomposite powders prepared by mechanical alloying

Tuning the microstructure and strengthening mechanism of the CoCrFeNi high-entropy alloy via doping metalloid and interstitial elements

Microstructure, mechanical and tribological properties of oxide dispersion strengthened CoCrFeMnNi high-entropy alloys fabricated by powder metallurgy

Study on Microstructure and Properties of WC Particle-Reinforced FeCoCrNi-Matrix High Entropy Alloy Composites

Preparation of WC/CoCrFeNiAl0.2 high-entropy-alloy composites by high-gravity combustion synthesis

Strengthening by Ti, Nb, and Zr doping on microstructure, mechanical, tribological, and corrosion properties of CoCrFeNi high-entropy alloys

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Improving Mechanical Properties of Co-Cr-Fe-Ni High Entropy Alloy via C and Mo Microalloying

Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy

Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy