Abstract:The present work focuses on the role of NiB and ZrB 2 addition on density, structural evolution, mechanical and thermal properties of 90 W-6Ni-4Co (wt%) heavy alloys. The investigated tungsten heavy alloys were sintered at 1485 °C and 1500 °C with a holding time of 75 min in H 2 atmosphere. Compared to the base alloy 90 W-6Ni-4Co, the NiB-substituted alloys showed improved densification at both sintering temperatures. An in-depth study of the phase and microstructure of the 1500 °C sintered samples was carried out. X-ray diffraction analysis confirmed the presence of ZrO 2 in ZrB 2 containing WHAs. Microstructural analysis affirms that ZrB 2 incorporation attributes for grain size refinement in sintered alloys. Furthermore, the elephant foot formation in the sintered samples was avoided by incorporating NiB individually or in combination with ZrB 2 dispersoids. The distortion parameter ( δ ) of the samples sintered at 1500 °C was found to be decreased from 24.83 (0 wt% ZrB 2 ) to 6.36 (2 wt% ZrB 2 ). On the other hand, the combined addition of NiB and ZrB 2 provides better shape retention with δ =2.82 for the tungsten heavy alloys with 3 wt% NiB and 2 wt% ZrB 2 . The maximum compressive stress of ~2000 MPa was obtained in the 89 W-6Ni-4Co-1ZrB 2 samples. The maximum and minimum bulk hardness of 432 ± 5 HV 3 and 365 ± 9 HV 3 was obtained for 88 W-3Ni-3NiB-4Co-2ZrB 2 and 90 W-6Ni-4Co heavy alloys. The coefficient of thermal expansion of the 90 W-6Ni-4Co alloy was found to be the highest (7.65 × 10 −6 /°C), which was reduced to 7.1 × 10 −6 /°C and 6.8 × 10 −6 /°C with the incorporation of 1 and 2 wt% ZrB 2 respectively. W-rich channels were noticed in the microstructure of 1500 °C sintered samples. Overall, W-Ni/NiB-Co-ZrB 2 alloys are very effective in enhancing the mechanical properties and distortion behavior compared to W-Ni-Co alloys.

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Microstructure and mechanical properties of liquid–phase sintered W@NiFe composite powders

Fine-grained 93W-4.9Ni-2.1Fe alloy with ultrahigh yield strength prepared via low temperature sintering of W nanocomposite powder

Fabrication and characterization of W/Cu/Ni-based high specific gravity alloy with Zr and Ti combined addition

Tungsten heavy alloy: Nano-crystallinity and alloying induced low temperature sintering, microstructure and mechanical properties

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Simultaneous enhancements of strength and hardness for fine-grained W-NiFeCoCrMn composites

Effect of Ni Content on Microstructure and Properties of WC-Ni Composites Prepared by Electroless Plating and Powder Metallurgy

Preparation and properties of W-30 wt% Cu alloy with the additions of Ni and Fe elements

A novel dissolution-precipitation mechanism during liquid phase sintering and its strengthening effects in W-Ni-Fe alloys with low W contents

Powder-Route Synthesis and Mechanical Testing of Ultrafine Grain Tungsten Alloys

Development and Characterization of a Novel Fine-Grained W–Ni–Mn–Mo Alloys with La2O3 Addition Prepared Via Low-Temperature Sintering

Fabrication of Ultra-Fine-Grained W-TiC Alloys by a Simple Ball-Milling and Hydrogen Reduction Method

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

A Tungsten Heavy Alloy with Enhanced Performance Prepared by Spark Plasma Sintering from Fine Spherical Tungsten Powders

Ultrafine-Grained Tungsten Heavy Alloy Prepared by High-Pressure Spark Plasma Sintering

Fabrication of nanocrystalline and ultra-hard tungsten alloy by dual particles dispersion strengthening

Systematic investigation of microstructure, distortion, mechanical and thermal properties of NiB and ZrB 2 -modified 90 W-6Ni-4Co alloys

The effect of fine W particles in matrix phase on mechanical properties of tungsten heavy alloys

Mechanical Properties of a Novel Tungsten Fiber-Reinforced Tungsten Composite Prepared Through Powder Extrusion Printing and High-Pressure High-Temperature Sintering