Abstract:Alloying is known as an effective strategy to improve the mechanical properties of metallic materials. Here we show that the microstructure and mechanical behavior of a TiZrNbHf1.6 high entropy alloy film can be highly tuned by Ni addition. The newly designed TiZrNbHf1.6Nix (x = 0, 0.4, 1.2, 1.8, 2.5, 3.0, 4.6) alloy films are synthesized by co-sputtering Ti, Zr, Nb, Hf and Ni elemental targets. The microstructure and mechanical behavior of the alloy films are investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and nano/micro-indentations. The microstructural analysis indicates that the TiZrNbHf1.6 film has a single body-centered cubic with columnar-nanograined structure. As Ni content increases to 0.4 or above, the films show a complete amorphous structure. Our theoretical analysis shows that the transition from the crystalline to the amorphous structure can be attributed to the large atomic radius difference and the change of the thermodynamic parameters (e.g., mixing entropy and mixing enthalpy) due to the Ni addition. Compared to the TiZrNbHf1.6 film with a hardness of 4.8 GPa, a hardness increase of 8–35% is achieved in the Ni-doped alloy films (5.2–6.5 GPa) as measured by nanoindentation. The elevated hardness may be attributed to the severe lattice distortion and the amorphous structure induced by the Ni addition. Furthermore, microindentation reveals a diversity of deformation behavior in those films with different Ni content. A homogeneous deformation (slight plastic pileup) occurred in the films with Ni content of 1.2 and 4.6, which is close to the deformation behavior of the crystal TiZrNbHf1.6 film. While the film with a Ni content of 1.8 exhibits a catastrophic cracking deformation. Finally, multiple shear banding dominates the deformation of these films with Ni content of 0.4, 2.5 and 3.0. Our findings demonstrate that ultrastrong and highly deformable amorphous high entropy alloy thin films can be developed by appropriate element addition, making them promising materials for corrosion and wear-resistant coatings.

Systematic investigation of microstructure, distortion, mechanical and thermal properties of NiB and ZrB 2 -modified 90 W-6Ni-4Co alloys

Improving mechanical properties of W-Ni 3 Al alloy through Zr element addition: Solid-solution and oxide particle strengthening

Improved mechanical properties of W-Zr-Ti-Nb alloys via adding Ti and Nb

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

The effect of fine W particles in matrix phase on mechanical properties of tungsten heavy alloys

Effect of vacuum heat treatment on microstructure evolution and mechanical properties of 93W-4.9Ni-2.1Fe-(ZrB2) alloys

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Microstructure-property relationship in Zr-alloyed Ni-rich NiTi alloys: Enhancements in high-temperature stability and superelasticity

New low-temperature sintering tungsten-nickel-antimony alloy: Microstructure evolution and mechanical properties

Nickel content-dependent microstructure and mechanical properties of TiZrNbHfNi high entropy alloy thin films

Effect of cobalt content on the microstructure, microtexture, and mechanical properties of W-Ni-Fe-xCo alloys during solid-phase-sintering and liquid-phase-sintering

Effect of High‐Energy Ball‐Milling Duration on Densification, Microstructure, and Mechanical Properties of Cr2AlC‐Dispersed 90W‐6Ni‐2Fe‐2Co Heavy Alloys

Effects of Zr and Co on the Microstructure and Mechanical Properties of NiAl-based Alloys

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Effect of Ni content on the microstructure and properties of WCoB-TiC cermets

Microstructure and mechanical characterizations of liquid phase sintered W-Ni-Cu heavy alloy modified with La 2 O 3 and Fe addition

Effect of Tungsten on Microstructure and Mechanical Properties of Novel NiMnCrMoWx High-Entropy Alloys Developed by Mechanical Alloying

Effect of Sintering Temperatures on Grain Coarsening Behaviors and Mechanical Properties of W-NiTi Heavy Tungsten Alloys

Reactivity of tungsten tetraboride powders with nickel alloys: Effect of TiAl 3 and Zr additions

Alloying Effects on the Microstructure and Properties of Laser Additively Manufactured Tungsten Materials