Abstract:Alloying is known as an effective strategy to improve the mechanical properties of metallic materials. Here we show that the microstructure and mechanical behavior of a TiZrNbHf1.6 high entropy alloy film can be highly tuned by Ni addition. The newly designed TiZrNbHf1.6Nix (x = 0, 0.4, 1.2, 1.8, 2.5, 3.0, 4.6) alloy films are synthesized by co-sputtering Ti, Zr, Nb, Hf and Ni elemental targets. The microstructure and mechanical behavior of the alloy films are investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and nano/micro-indentations. The microstructural analysis indicates that the TiZrNbHf1.6 film has a single body-centered cubic with columnar-nanograined structure. As Ni content increases to 0.4 or above, the films show a complete amorphous structure. Our theoretical analysis shows that the transition from the crystalline to the amorphous structure can be attributed to the large atomic radius difference and the change of the thermodynamic parameters (e.g., mixing entropy and mixing enthalpy) due to the Ni addition. Compared to the TiZrNbHf1.6 film with a hardness of 4.8 GPa, a hardness increase of 8–35% is achieved in the Ni-doped alloy films (5.2–6.5 GPa) as measured by nanoindentation. The elevated hardness may be attributed to the severe lattice distortion and the amorphous structure induced by the Ni addition. Furthermore, microindentation reveals a diversity of deformation behavior in those films with different Ni content. A homogeneous deformation (slight plastic pileup) occurred in the films with Ni content of 1.2 and 4.6, which is close to the deformation behavior of the crystal TiZrNbHf1.6 film. While the film with a Ni content of 1.8 exhibits a catastrophic cracking deformation. Finally, multiple shear banding dominates the deformation of these films with Ni content of 0.4, 2.5 and 3.0. Our findings demonstrate that ultrastrong and highly deformable amorphous high entropy alloy thin films can be developed by appropriate element addition, making them promising materials for corrosion and wear-resistant coatings.

Microstructure-property relationship in Zr-alloyed Ni-rich NiTi alloys: Enhancements in high-temperature stability and superelasticity

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Effect of Zr Element Addition on the Mechanical Behavior of Ti48.5-Xni49.5nb2 Alloy

In Situ Synchrotron Radiation X-ray Diffraction Study on Phase and Oxide Growth during a High Temperature Cycle of a NiTi-20 at.% Zr High Temperature Shape Memory Alloy

Improving the Microstructure and Mechanical Properties of Zr-Ti Alloy by Nickel Addition

Alloying Effect on the Microstructure and Property of Single Crystal Ni 3 Al Alloys

Microstructures and Mechanical Properties of Cast Nb-Ti-Si-Zr Alloys

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Effect of microalloying additions on microstructural evolution and thermal stability in cast Al-Ni alloys

Ni-Ti-Zr ternary alloy with high transition temperature fabricated by laser powder bed fusion

Superelastic and shape memory properties of TixNb3Zr2Ta alloys

Thermo-mechanical behavior of hypoeutectic Ni-Y-Zr alloys

Microstructure and mechanical properties of Ti–Nb–Fe–Zr alloys with high strength and low elastic modulus

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Effects of Si variation and Zr addition on the microstructure, oxidation resistance and mechanical property at 1523 K of Nb-Si-Ti/Zr/Hf-Cr/Al high-entropy superalloys

Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy

Mechanical Properties and Phase Stability of Ti-Nb-Ta-Zr-O Alloys

Improving mechanical properties of W-Ni 3 Al alloy through Zr element addition: Solid-solution and oxide particle strengthening

EFFECT OF Zr ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NiAl/Cr(Mo)BASE EUTECTIC ALLOY

Zr addition-induced transitions of deformation mechanism at high temperatures of Nb-Si-Ti based multi-alloys: Super-dislocations in γ-Nb 5 Si 3

Nickel content-dependent microstructure and mechanical properties of TiZrNbHfNi high entropy alloy thin films