Abstract:Aiming to obtain a martensite-free microstructure of Ti–Zr alloys with a combination of enhanced deformability and improved mechanical properties for dental application, two high Zr-containing Ti-based alloys were prepared with commercially pure titanium as a control. The effects of Zr addition on the deformation mechanism, microstructure and mechanical properties were investigated. After thermo-mechanical processing and cold deformation, samples were characterized using Vickers microhardness, tensile tests, X-ray diffraction (XRD) scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD and TEM examinations revealed that the increasing Zr addition suppressed the deformation twining and favored the deformation-induced face-centered cubic (FCC) phase, the corresponding reason was discussed. There is a competition between the deformation twin and FCC phase. The two types of FCC phase were simultaneously found with orientation relationships (ORs) of Basal-type: <11–20>HCP//<110>FCC and {0001}HCP//{111}FCC and Prismatic-type: <0001>HCP//<001>FCC and {10-10}HCP//{110}FCC. This phase transformation enhanced the deformability during processing. As the Zr addition increased, the microhardness, mechanical strength and plasticity are increased concurrently. The interactions of twins were found to cause brittle fracture of Ti20Zr alloy. Based on the texture analysis, the activated slip systems of FCC phase were determined via calculating the Schmid factor. The FCC phase not only provided additional slip systems but also impeded dislocation slip effectively, improving the strength-plasticity of Ti30Zr alloy. The findings will provide a novel approach associated with the strengthening-toughening mechanism of metallic materials.

Improving the Microstructure and Mechanical Properties of Zr-Ti Alloy by Nickel Addition

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Effect of Zr Addition on Microstructures and Mechanical Properties of Ni-46Ti-4Al Alloy

Microstructure and Mechanical Properties of Ti-Zr-Cr Biomedical Alloys.

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy

Microstructure-property relationship in Zr-alloyed Ni-rich NiTi alloys: Enhancements in high-temperature stability and superelasticity

Microstructural Evolution and Mechanical Properties of Al-4Ni-0.4 V Alloyed with Zr and Ti at Elevated Temperatures

Effect of Ti and Ni on Microstructures and Mechanical Properties of ZA27 Alloy

Improving the Mechanical Properties of Cu-15Ni-8Sn Alloys by Addition of Titanium.

Microstructures and Mechanical Properties of Al–Zn–Mg–Cu Alloy with the Combined Addition of Ti and Zr

Influence of Zr Content on Phase Transformation, Microstructure and Mechanical Properties of Ti75−xNb25Zrx (x = 0–6) Alloys

Refinement of Αs Phase and Formation of Nano-Twins of Ti–7Mo–4Al–3Nb–2Cr Alloyed by Zr Element

Microstructure and Mechanical Properties of Ti43Al6Nb Alloys with Different Zirconium Contents

Effects of Ti Addition on Microstructure, Mechanical Properties and Corrosion Resistance of the Cu-Zn-Ni Alloy

Improving mechanical properties of W-Ni 3 Al alloy through Zr element addition: Solid-solution and oxide particle strengthening

Microstructures and Mechanical Properties of Cast Nb-Ti-Si-Zr Alloys

Effects of Zr and Co on the Microstructure and Mechanical Properties of NiAl-based Alloys

Effect of Zr Element Addition on the Mechanical Behavior of Ti48.5-Xni49.5nb2 Alloy

Effects of Ni Addition on the Microstructure and Compressive Deformation Behavior in Zr–Cu–Ni Martensitic Alloys