Abstract:Refractory high-entropy alloys (RHEAs) composed of Ti, Zr, Hf, and Nb have emerged as promising materials for high-temperature aerospace applications due to their exceptional balance of strength and toughness, coupled with a reduced density and softening resistance. This study delves into the influence of alloy composition on the mechanical properties, a pivotal aspect in the design of RHEAs. We investigate a series of Ti48-xZrxHf26Nb26 (x = 14, 18, 22, 26, 30, 34) alloys, prepared through suction casting and homogenization treatments. The phases, microstructure, and fracture morphology of these alloys are analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and electron backscattered diffraction (EBSD), subsequent tensile tests provide insights into the strength and elongation characteristics of alloys. The homogenized alloys consistently exhibit one BCC phase with equiaxed grains, whereas the fracture mode shifts from intergranular to transgranular, and return to intergranular as the Zr content increases. Experimental results reveal an asymmetry mechanical behavior, alloys with higher Ti content display superior toughness (elongation 17.83% for Ti = 34 at.%) compared to those with higher Zr content (elongation 16.05% for Zr = 34 at.%). Among them, the Ti22Zr26Hf26Nb26 alloy achieves the peak tensile strength of 695.25 MPa, indicating an inverse relationship between strength and toughness. Solid-solution strengthening and chemical short-range orderings emerge as the predominant contributors to the overall strength of the TiZrHfNb alloys. To gain a deeper understanding of the mechanical behavior at the atomic scale, we performed first-principles calculations to investigate the elastic properties and charge density of Ti48-xZrxHf26Nb26 alloys in the BCC structure. These calculations shed light on the underlying mechanisms governing the strength and toughness behavior. The present work offers valuable insights into the design of mechanical properties of TiZrHfNb RHEAs, serving as a paradigm for future materials development in this field.

Thermo-mechanical behavior of hypoeutectic Ni-Y-Zr alloys

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Microstructure-property relationship in Zr-alloyed Ni-rich NiTi alloys: Enhancements in high-temperature stability and superelasticity

Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy

Alloying Effect on the Microstructure and Property of Single Crystal Ni 3 Al Alloys

Effect of microalloying additions on microstructural evolution and thermal stability in cast Al-Ni alloys

Microstructure and elevated-temperature mechanical properties of refractory AlMo0.5NbTa0.5TiZr High Entropy Alloy fabricated by powder metallurgy

EFFECT OF Zr ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NiAl/Cr(Mo)BASE EUTECTIC ALLOY

Microstructural engineering of medium entropy NiCo(CrAl) alloy for enhanced room and high-temperature mechanical properties

Microstructure, hardening and mechanical properties of hypoeutectic Al‐Ce‐Ni alloys with Zr and Zr+Sc additions and the effect of ultrasonic melt processing

Thermal stability of the multicomponent nanocrystalline Ni–ZrNbMoTa alloy

Revealing the Mechanical Behavior of Ti Zr Hf Nb High-Entropy Alloy Through Zirconium Content Variations

Effect of Zr Element Addition on the Mechanical Behavior of Ti48.5-Xni49.5nb2 Alloy

Revealing the mechanical behavior of Ti48-xZrxHf26Nb26 high-entropy alloy through zirconium content variations

Crystalline phases found in rapidly quenched Ni-Nb-Zr alloys

Experimental Investigation and Thermodynamic Assessment of the Mo–Ni–Zr Ternary System

Effects of trace ytterbium addition on microstructure, mechanical and thermal properties of hypoeutectic Al–5Ni alloy

In Situ Synchrotron Radiation X-ray Diffraction Study on Phase and Oxide Growth during a High Temperature Cycle of a NiTi-20 at.% Zr High Temperature Shape Memory Alloy

Compressive vs. tensile yield and fracture toughness behavior of a body-centered cubic refractory high-entropy superalloy Al 0.5 Nb 1.25 Ta 1.25 TiZr at temperatures from ambient to 1200°C

Microstructure and Mechanical Properties of Biomedical Ti-Zr-Nb-Ta-Sn High-Entropy Alloys

An excellent synergy in yield strength and plasticity of NbTiZrTa 0.25 Cr 0.4 refractory high entropy alloy through the regulation of cooling rates