Abstract:Uniform distribution of Cr2AlC MAX phase plays a crucial role in evolution of microstructure and mechanical properties. The incorporation of Cr2AlC MAX phase with and without milling in conventionally sintered WHA significantly enhances refinement of W‐grains. Combination of grain size refinement and dispersion strengthening results in the improvement of tensile properties This study focuses on the role of Cr2AlC‐MAX phase incorporation on the density, phase composition, microstructure, and mechanical properties of 90W‐6Ni‐2Fe‐2Co heavy alloy. The blended powders are ball milled in a high‐energy ball mill up to 40 h, compacted, and sintered at 1500 °C. The mechanical alloying results in a refined microstructure with uniform distribution of W, matrix, and dispersoids. The minimum grain size of W (14.7 ± 5.6 μm) is obtained in 2 wt% Cr2AlC‐containing tungsten alloy prepared from 40 h‐milled powders. Among the investigated alloys, 1 wt% Cr2AlC‐incorporated samples exhibit maximum compressive stress (2026 MPa). The incorporation of fine Cr2AlC as dispersoids is found to be beneficial in improving the strength as well as ductility of WHAs. The best combination of yield strength (553.4 MPa), ultimate tensile strength (1011.2 MPa), ductility (11.4%), and product of strength and elongation (11.5 GPa%) is found in alloy prepared from 40 h milled 90W‐4.8Ni‐1.6Fe‐1.6Co‐2Cr2AlC. The improved tensile strength in Cr2AlC‐incorporated WHAs may be attributed to the combined effect of grain size refinement and dispersion strengthening. Overall, the combination of ball milling and Cr2AlC incorporation in tungsten‐heavy alloys is found to be effective in developing a novel W‐based alloy system for strategic applications.

Effect of High‐Energy Ball‐Milling Duration on Densification, Microstructure, and Mechanical Properties of Cr2AlC‐Dispersed 90W‐6Ni‐2Fe‐2Co Heavy Alloys

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Microstructure and Mechanical Properties of WC-10wt.%AlCoCrFeNi Cemented Carbides Fabricated by Plasma-Assisted Ball Milling

Microstructure evolution and mechanical properties of CoCrFeNiAl0.3 high entropy alloy produced by ball milling in combination with thermomechanical consolidation

Amorphization in the AlC System by Mechanical Alloying

Comparative study of the microstructure and phase evolution of FeCoCrNiAl high-entropy alloy-matrix WC nanocomposite powders prepared by mechanical alloying

Effect of Tungsten on Microstructure and Mechanical Properties of Novel NiMnCrMoWx High-Entropy Alloys Developed by Mechanical Alloying

The effect of fine W particles in matrix phase on mechanical properties of tungsten heavy alloys

Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys

Mechanical alloying of ODS tungsten heavy alloys and microstructure development of intermetallic compounds

Effects of milling time and sintering temperature on the mechanical properties of 8 wt% WC/AlCoCrFeNiTi 0.5 high entropy alloy matrix composite

Fabrication and Stability of Ultrafine ZrC Nanoparticles Dispersion Strengthened Sub-Micrometer Grained W Alloy

Hardness and Corrosion Behavior of CrMnFeCoNi Alloy Fabricated by Ball Milling and Spark Plasma Sintering

Influence of Tungsten Content on Microstructural Evolution of Cobalt-Containing High-Entropy Alloy via Mechanical Alloying

Effect of Nanocrystalline Tungsten Powders on the Microstructure and Properties of Liquid-Phase Sintered 93W Alloys

Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides

Effect of Mechanical Alloying on the Microstructure and Properties of W–Ti Alloys Fabricated by Spark Plasma Sintering

Effects of Sintering Temperature on Fine-Grained Tungsten Heavy Alloy Produced by High-Energy Ball Milling Assisted Spark Plasma Sintering

Effect of ball milling treatment on the microstructures and properties of Cr2AlC powders and hot pressed bulk ceramics

Effects of milling process parameters and PCAs on the synthesis of Al0.8Co0.5Cr1.5CuFeNi high entropy alloy powder by mechanical alloying