Abstract:Reducing the grain sizes of tungsten (W) in tungsten heavy alloys (WHAs) is pivotal for achieving high strength. Traditional liquid phase sintering (LPS) often results in the growth of W grains, due to the long sintering time and slow cooling rates. To achieve a high cooling rate, a laser melting deposition (LMD) additive manufacturing technique was employed in this study to prepare 90 W-7Ni-3Fe alloys with unique pre-sintered powder prepared using a spray granulation method. The pre-sintered granulated powder particles, each consisting of many fine elemental particles, exhibit a spherical shape with a size up to 100 μm, contributing to optimal flowability. Thin plate samples were prepared using laser powers ranging from 500 W to 900 W. The results show that with laser powers below 600 W, WHAs with fine W grain sizes of 5 μm can be successfully obtained, representing a record of the finest grain size ever reported for the laser additive manufactured WHAs. On the other hand, at 900 W, the W grain size increases significantly to 17 μm, comparable to that of traditional LPS samples. The volume fraction of W grains increases with increasing laser power due to the Ni and Fe evaporation, and at laser power exceeding 700 W, this fraction aligns with 95WNiFe alloys. The fine grains and/or the increased volume fractions of W grains contribute to a higher micro-hardness in these samples compared to LPS samples. Nonetheless, high porosities are also observed in these samples, which leads to a diminished micro-hardness compared to previous LMD 90 W-7Ni-3Fe alloys prepared with mixed elemental powder. This study underscores the potential of the LMD method using pre-sintered powder to fabricate fine-grained WHAs, paving the way for the fabrication of high-strength and high-ductility WHAs using LMD.

A Tungsten Heavy Alloy with Enhanced Performance Prepared by Spark Plasma Sintering from Fine Spherical Tungsten Powders

Ultrafine Grain Tungsten Heavy Alloys with Excellent Performance Prepared by Spark Plasma Sintering

Ultrafine-Grained Tungsten Heavy Alloy Prepared by High-Pressure Spark Plasma Sintering

Microstructure and mechanical properties of fine-grained W-7Ni-3Fe heavy alloy by spark plasma sintering

Effects of Sintering Temperature on Fine-Grained Tungsten Heavy Alloy Produced by High-Energy Ball Milling Assisted Spark Plasma Sintering

Fine-grained 93W-4.9Ni-2.1Fe alloy with ultrahigh yield strength prepared via low temperature sintering of W nanocomposite powder

Microstructure and properties of liquid-phase sintered tungsten heavy alloys by using ultra-fine tungsten powders

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Achieving fine-grain tungsten heavy alloys by selecting a high entropy alloy matrix with low W grain growth rate

Effect of Nanocrystalline Tungsten Powders on the Microstructure and Properties of Liquid-Phase Sintered 93W Alloys

Laser melting deposition of fine-grained 90 W-7Ni-3Fe alloys using pre-sintered granulated powder

A TiAl Based Alloy with Excellent Mechanical Performance Prepared by Gas Atomization and Spark Plasma Sintering

Effects of in situ phase reaction of η M12C and M6C on microstructure and mechanical properties of tungsten heavy alloy via spark plasma sintering

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Microstructure and mechanical characterizations of liquid phase sintered W-Ni-Cu heavy alloy modified with La 2 O 3 and Fe addition

Enhanced Strength and Ductility in a Spark Plasma Sintered CoCrCu0·5NiAl0.5 High-Entropy Alloy Via a Double-Step Ball Milling Approach for Processing Powders

A Novel and High-Strength Ti–Al–V–Fe Alloy Prepared by Spark Plasma Sintering

Densification, microstructural evolutions of 90W-7Ni-3Fe tungsten heavy alloys during laser melting deposition process

New low-temperature sintering tungsten-nickel-antimony alloy: Microstructure evolution and mechanical properties

Phase, Microstructure and Properties Evolution of Fine-Grained W–Mo–Ni–Fe Alloy During Spark Plasma Sintering

Tungsten heavy alloy: Nano-crystallinity and alloying induced low temperature sintering, microstructure and mechanical properties