Abstract:Uniform distribution of Cr2AlC MAX phase plays a crucial role in evolution of microstructure and mechanical properties. The incorporation of Cr2AlC MAX phase with and without milling in conventionally sintered WHA significantly enhances refinement of W‐grains. Combination of grain size refinement and dispersion strengthening results in the improvement of tensile properties This study focuses on the role of Cr2AlC‐MAX phase incorporation on the density, phase composition, microstructure, and mechanical properties of 90W‐6Ni‐2Fe‐2Co heavy alloy. The blended powders are ball milled in a high‐energy ball mill up to 40 h, compacted, and sintered at 1500 °C. The mechanical alloying results in a refined microstructure with uniform distribution of W, matrix, and dispersoids. The minimum grain size of W (14.7 ± 5.6 μm) is obtained in 2 wt% Cr2AlC‐containing tungsten alloy prepared from 40 h‐milled powders. Among the investigated alloys, 1 wt% Cr2AlC‐incorporated samples exhibit maximum compressive stress (2026 MPa). The incorporation of fine Cr2AlC as dispersoids is found to be beneficial in improving the strength as well as ductility of WHAs. The best combination of yield strength (553.4 MPa), ultimate tensile strength (1011.2 MPa), ductility (11.4%), and product of strength and elongation (11.5 GPa%) is found in alloy prepared from 40 h milled 90W‐4.8Ni‐1.6Fe‐1.6Co‐2Cr2AlC. The improved tensile strength in Cr2AlC‐incorporated WHAs may be attributed to the combined effect of grain size refinement and dispersion strengthening. Overall, the combination of ball milling and Cr2AlC incorporation in tungsten‐heavy alloys is found to be effective in developing a novel W‐based alloy system for strategic applications.

Powder-Route Synthesis and Mechanical Testing of Ultrafine Grain Tungsten Alloys

The Effect of A Small Amount of Tungsten on the Microstructure of Mechanically Alloyed Ag37cu63

High-pressure Preparation of Bulk Tungsten Material with Near-Full Densification and High Fracture Toughness

Mechanical Properties and Thermal Shock Performance of W-Y2O3composite Prepared by High-Energy-rate Forging

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Fabrication of nanocrystalline and ultra-hard tungsten alloy by dual particles dispersion strengthening

Pressureless Two-Step Sintering of Ultrafine-Grained Tungsten

Tungsten heavy alloy: Nano-crystallinity and alloying induced low temperature sintering, microstructure and mechanical properties

Fabrication of Ultra-Fine-Grained W-TiC Alloys by a Simple Ball-Milling and Hydrogen Reduction Method

Coarse-grained WC–6Co hardmetals with dual-scale and plate-like WC structures fabricated by convention powder metallurgy process

Alloying Effects on the Microstructure and Properties of Laser Additively Manufactured Tungsten Materials

Tungsten Matrix Composite Reinforced with CoCrFeMnNi High-Entropy Alloy: Impact of Processing Routes on Microstructure and Mechanical Properties

Microstructure and Mechanical Properties of W-Al2O3 Alloy Plates Prepared by a Wet Chemical Method and Rolling Process

Ultrafine-grained W-based alloys prepared by HIP with ultrahigh hardness and excellent thermal stability

Effect of High‐Energy Ball‐Milling Duration on Densification, Microstructure, and Mechanical Properties of Cr2AlC‐Dispersed 90W‐6Ni‐2Fe‐2Co Heavy Alloys

Synthesis of Ultrafine Fe-W-Al-Ti-Ni-C-B Powders by Mechanical Alloying

Effect of Microstructure Refinement on Surface Morphology and Dynamic Mechanical Properties of W-Cu Alloys

Mechanical alloying of ODS tungsten heavy alloys and microstructure development of intermetallic compounds

Ultrafine-Grained Tungsten Heavy Alloy Prepared by High-Pressure Spark Plasma Sintering

Near crack free additive manufacturing of a novel W-Nb-C alloy