Abstract:This study introduces a double‐layer metallization strategy using silver as a seed layer with nickel and copper forming the bulk, offering a cost‐effective alternative to traditional silver contacts in silicon solar cells. Demonstrating a substantial reduction in silver usage to below 2.5 mg/Wp, the novel approach promises to significantly lower manufacturing costs without compromising performance. Microstructural analysis and peel force tests confirm the integrity of the contacts, indicating no copper diffusion into the silicon during the firing process. Efficient metal contact formation is pivotal for the production of cost‐effective, high‐performance crystalline silicon (Si) solar cells. Traditionally, screen‐printed silver (Ag) contacts on the front surface have dominated the industry owing to their simplicity, high throughput, and significant electrical benefits. However, the high cost associated with using over 13–20 mg/Wp of Ag can impede the development of truly cost‐effective solar cells. Therefore, there is an urgent need to explore alternative, economically viable metals compatible with silicon substrates. This study reports on the application of a contact stack consisting of Ag, nickel (Ni), and copper (Cu) in Si solar cells. To prevent Schottky contact formation, Ag is implemented as a seed layer, whereas Ni and Cu form the metal bulk layer. The fabricated bi‐layer stack without selective emitter exhibits a maximum efficiency of ~21.5%, a fill factor of 81.5%, and an average contact resistance of 5.88 mΩ·cm2 for a monofacial PERC cell. Microstructure analysis demonstrates that the metals within the contacts remain distinct, and Cu diffusion into the silicon during the firing process is absent. Consequently, printed bi‐layer contacts emerge as a promising alternative to Ag contacts, reducing the Ag consumption to below 2.5 mg/Wp per cell without compromising overall efficiency.

Balanced contact method: Reduction of thermomechanical stress in silicon solar cells induced by interconnection

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

Thermomechanical stress in solar cells: Contact pad modeling and reliability analysis

Strategies for minimizing induced thermomechanical stress in glass–glass PV modules with half cells identified using finite element modelling

Tuning of the Contact Properties for High-Efficiency Si/PEDOT:PSS Heterojunction Solar Cells

Thermo-mechanical stress modelling and fracture analysis on ultra-thin silicon solar cell based on super multi-busbar PV modules

Optimizing the Back Contact of Kesterites and Perovskites: Band Edge Design and Defect Engineering in Molybdenum Chalcogenides

Optimized Metallization for Interdigitated Back Contact Silicon Heterojunction Solar Cells

Towards Thinner and Low Bowing Silicon Solar Cells: Form the Boron and Aluminum Co‐doped Back Surface Field with Thinner Metallization Film

Utilizing insulating nanoparticles as the spacer in laminated flexible polymer solar cells for improved mechanical stability

Novel busbar design for screen-printed front side Al metallization of high-efficiency solar cell

Enhancing Adhesion and Reducing Ohmic Contact through Nickel–Silicon Alloy Seed Layer in Electroplating Ni/Cu/Ag

Improving Performance of Bifacial‐Grid III–V Solar Cells Bonded on Glass by Selective Contact Annealing

Optimization of Contact Interface Resistance for CMOS Circuits

Improvement of solder interconnections applied on back contact solar cells with low-temperature copper paste busbars

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Improvement in the reliability of crystalline silicon solar cell interconnection by using Nickel Micro-Plating Bonding (NMPB) technology

Insight into the Contact Mechanism of Ag/Al–Si Interface for the Front‐Side Metallization of TOPCon Silicon Solar Cells

Thermal Residual Stress Analysis of Soldering and Lamination Processes for Fabrication of Crystalline Silicon Photovoltaic Modules

Implementation of nickel and copper as cost‐effective alternative contacts in silicon solar cells

Balancing Charge Extraction for Efficient Back‐Contact Perovskite Solar Cells by Using an Embedded Mesoscopic Architecture