Abstract:Despite the extensive ongoing research on MoS2 field effect transistors (FETs), the key role of device processing conditions in the chemistry involved at the metal-to-MoS2 interface and their influence on the electrical performance are often overlooked. In addition, the majority of reports on MoS2 contacts are based on exfoliated MoS2, whereas synthetic films are even more susceptible to the changes made in device processing conditions. In this paper, working FETs with atomic layer deposition (ALD)-based MoS2 films and Ti/Au contacts are demonstrated, using current–voltage (I–V) characterization. In pursuit of optimizing the contacts, high-vacuum thermal annealing as well as O2/Ar plasma cleaning treatments are introduced, and their influence on the electrical performance is studied. The electrical findings are linked to the interface chemistry through X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) analyses. XPS evaluation reveals that the concentration of organic residues on the MoS2 surface, as a result of resist usage during the device processing, is significant. Removal of these contaminations with O2/Ar plasma changes the MoS2 chemical state and enhances the MoS2 electrical properties. Based on the STEM analysis, the observed progress in the device electrical characteristics could also be associated with the formation of a continuous TiSx layer at the Ti-to-MoS2 interface. Scaling down the Ti interlayer thickness and replacing it with Cr is found to be beneficial as well, leading to further device performance advancements. Our findings are of value for attaining optimal contacts to synthetic MoS2 films.This article has not yet been cited by other publications.

Optimization of Contact Interface Resistance for CMOS Circuits

Understanding the Impact of Surface Engineering, Structure, and Design on Electromigration Through Monte Carlo Simulation and In‐Situ SEM Studies

Contacts at the Nanoscale and for Nanomaterials

On the Contact Optimization of ALD-Based MoS 2 FETs: Correlation of Processing Conditions and Interface Chemistry with Device Electrical Performance

Improving Electric Contacts to Two-Dimensional Semiconductors

A Novel Analytical Model for Ohmic Contacts to Planar Devices: Theoretical Design and Experimental Verification

Searching for Device Processing Compatible Ohmic Contacts to Implanted P-Type 4H-Sic

Graphenic Carbon-Silicon Contacts for Reliability Improvement of Metal-Silicon Junctions

The use of refractory metal and electron-beam sintering to reduce contact resistance for VLSI

Optimization of Spin-on-glass Process for Multilevel Metal Interconnects

Simulation Studies on Robust Contacts in V 2 CT 2 /MoSi 2 N 4 (T═O, F, OH) van der Waals Heterojunction Nanostructures: Implications for Optoelectronic Devices

Contact Vs. Non-Contact Cleaning: Correlating Interfacial Reaction Mechanisms to Processing Methodologies for Enhanced FEOL/BEOL Post-CMP Cleaning

(Invited) Technology Options to Reduce Contact Resistance in Nanoscale III-V MOSFETs

Contact Optimisation Strategy for Wafer-Scale Field-Effect Transistors Based on Two-Dimensional Semiconductors

A method to improve the specific contact resistance of 4H-SiC Ohmic contact through increasing the ratio of sp 2 -carbon

Optimization design method of material stiffness of contact interface considering surface roughness for improving thermal contact performance

The Electromigration Performance Improvement of Al-Si-Cu/Tin/Ti/N+Si Contact

The Optimization of Contact Interface Between Metal/mos2 FETs by Oxygen Plasma Treatment

Modulation in Current Density of Metal/n-Sic Contact by Inserting Al2O3 Interfacial Layer

Effect of Surface Texture on Pinhole Formation in SiO x-Based Passivated Contacts for High-Performance Silicon Solar Cells

Optimization of Au-Free Ohmic Contact Based on the Gate-First Double-Metal AlGaN/GaN MIS-HEMTs and SBDs Process