Abstract:This study presents a novel approach to forming low-resistance ohmic contacts for AlGaN/GaN HEMTs. The optimized contacts exhibit an outstanding contact resistance of approximately 0.15 Ω·mm. This is achieved by firstly recessing the barrier of the heterostructure to a depth beyond the channel. In this way, the channel region is exposed on the sidewall of the recess. The coverage of the Ti/Al/Ti ohmic metalization on the sidewall is ensured through tilting of the sample during evaporation. The annealing process is performed at a low temperature of 550 °C. The approach does not require precise control of the recess etching. Furthermore, the method is directly applicable to most barrier designs in terms of thickness and Al-concentration. The impact of recessed sidewall angle, thickness and ratio of Ti and Al layers, and the annealing procedure are investigated. Structural and chemical analyses of the interface between the ohmic contacts and epi-structure indicate the formation of ohmic contacts by the extraction of nitrogen from the epi-structure. The approach is demonstrated on HEMT-structures with two different barrier designs in terms of Al-concentration and barrier thickness. The study demonstrate large process window in regard to recess depth and duration of the annealing as well as high uniformity of the contact resistance across the samples, rendering the approach highly suitable for industrial production processes.

Optimization of Au-Free Ohmic Contact Based on the Gate-First Double-Metal AlGaN/GaN MIS-HEMTs and SBDs Process

Process of Au-Free Source/Drain Ohmic Contact to AlGaN/GaN HEMT

Optimization of Ohmic Contact to Ultrathin-Barrier AlGaN/GaN Heterostructure via an 'Ohmic-Before-Passivation' Process

Interface Optimization and Band Alignments of HfTiO/InGaAs Gate Stacks by Metalorganic Chemical Vapor Deposition of AlON Passivation Layer

Optimization of Contact Resistance and DC Characteristics for AlGaN/GaN HEMTs Utilizing Sub-10 nm Nanohole Etching

Low Contact Resistance CMOS-Compatible RF GaN-on-Silicon HEMTs

Mechanism of Ti/Al/Ti/W Au-free ohmic contacts to AlGaN/GaN heterostructures via pre-ohmic recess etching and low temperature annealing

Low-Resistance Ta/Al/Ni/Au Ohmic Contact and Formation Mechanism on AlN/GaN HEMT

Design and Fabrication of Ohmic Contact on AlGaN/GaN Heterostructure

Analysis on the new mechanisms of low resistance stacked Ti/Al Ohmic contact structure on AlGaN/GaN HEMTs

Optimization of submicron Ni/Au/Ge contacts to an AlGaAs/GaAs two-dimensional electron gas

Fabrication of High-Uniformity and High-Reliability Si 3 N 4 /algan/gan MIS-HEMTs with Self-Terminating Dielectric Etching Process in a 150-Mm Si Foundry

Gate-first Process Compatible, High-Quality in Situ SiNx for Surface Passivation and Gate Dielectrics in AlGaN/GaN MISHEMTs

Structural investigation of ultra-low resistance deeply recessed sidewall ohmic contacts for AlGaN/GaN HEMTs based on Ti/Al/Ti-metallization

Low-Temperature Ohmic Contact Formation in AlN/GaN HEMT Using Microwave Annealing

Improved uniformity of contact resistance in GaAs MESFET using Pd/Ge/Ti/Au ohmic contacts

High thermal stability Ohmic contact for GaN-based devices

Improving the Manufacturability of Low-Temperature GaN Ohmic Contact by Blocking the Fluorine Ion Injection

Investigation of contact mechanism and gate electrostatic control in multi-channel AlGaN/GaN high electron mobility transistors with deep recessed ohmic contact

High- ${k}$ HfO 2 -Based AlGaN/GaN MIS-HEMTs with Y 2 O 3 Interfacial Layer for High Gate Controllability and Interface Quality

Low-Resistive Ohmic Contacts in High-Electron-Mobility AIN/GaN Heterostructures by Suppressing the Oxygen Incorporation